IEC 62841-3-4:2016 电动手持工具 便携式工具以及草坪和园艺机械 - 安全 - 第3-4部分:可移动工作台磨床的特殊要求

标准编号：IEC 62841-3-4:2016

中文名称：电动手持工具 便携式工具以及草坪和园艺机械 - 安全 - 第3-4部分:可移动工作台磨床的特殊要求

英文名称：Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders

发布日期：2016-02-18

标准范围

IEC 62841-3-4:20 16适用于可配备如下一个或两个附件的移动式台式磨床:-符合ISO 603-4:19 99的1型砂轮，直径不超过310mm，厚度不超过55mm；-直径不超过310mm且厚度不超过55mm的钢丝刷；-直径不超过310毫米且任何附件的圆周速度在10米/秒至50米/秒之间的抛光轮。请国家委员会注意，设备制造商和测试组织在新的、修订的或修订的IEC出版物出版后可能需要一个过渡期，以便根据新的要求制造产品，并为进行新的或修订的测试做好准备。委员会建议，该出版物的内容应在出版之日起36个月内通过，以便在全国范围内实施关键词:台式磨床手持工具可运输工具本出版物应与IEC 62841-1:20 14一起阅读。

IEC 62841-3-4:2016 applies to transportable bench grinders that can be equipped with one or two accessories as follows:
- type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
- wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
- polishing wheels with a diameter not exceeding 310 mm and with a peripheral speed of any accessory between 10 m/s and 50 m/s. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publicationKeywords: Bench Grinder, Hand-held tool, Transportable tool

This publication is to be read in conjunction with IEC 62841-1:2014.

标准预览图