IEC 61535:2019 固定安装中用于永久连接的安装耦合器

标准编号：IEC 61535:2019

中文名称：固定安装中用于永久连接的安装耦合器

英文名称：Installation couplers intended for permanent connection in fixed installations

发布日期：2019-10-16

标准范围

IEC 61535:2019作为IEC 61535:2019 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 61535:2019适用于两线、最多五线安装耦合器，包括接地（如果提供），额定电压不超过（含）500 V AC或DC，额定连接容量不超过（含）10 mm2，用于电气装置中的永久连接。对于市电电压以外的电压，带有附加触点的安装耦合器不在本文件的范围之内。这第二版取消并取代了2009年出版的第一版和修正案1:20 12。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-将范围扩大至直流应用；-增加了关于DC应用（标记等）的进一步要求，认为没有必要进行额外的测试程序；然而，在规范性文本中有必要进行一些修改；-将安装耦合器的应用领域改变和增强到室外应用中；-添加合适的温度范围；-更新规范性参考文献清单，尽可能修改为未注明日期的参考文献。

IEC 61535:2019 is available as IEC 61535:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61535:2019 applies to two-wire, up to five-wire installation couplers, including earth, if provided, with a rated voltage up to and including 500 V AC or DC and a rated connecting capacity up to and including 10 mm2 for permanent connection in electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this document. This second edition cancels and replaces the first edition published in 2009 and Amendment 1:2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- enlargement of the scope to DC application;
- addition of further requirements as regards DC application (marking, etc.), no additional test procedures were deemed necessary; however some modifications were necessary in the normative text;
- changes and enhancement of the field of application of installation couplers into outdoor applications;
- addition of a suitable temperature range;
- updating of the list of normative references, modified to undated references, where possible.

标准预览图