IEC 61800-3:2022 可调速电力驱动系统.第3部分:PDS和机床的EMC要求和特殊试验方法
标准编号：IEC 61800-3:2022
中文名称：可调速电力驱动系统.第3部分:PDS和机床的EMC要求和特殊试验方法
英文名称：Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools
发布日期：2022-11-30
标准范围
IEC 61800-3:20 22规定了可调速电力驱动系统(PDSs)和机床(MT)的电磁兼容性(EMC)要求。PDS是包括电子转换器的AC或DC电机驱动器。规定了输入和/或输出电压（线对线电压）高达35 kV交流均方根的交流和DC PDSs和MT的要求。本文件适用于所有额定功率的设备。作为产品EMC标准，本文件可用于PDS和MT的评估。它还可用于评估完整驱动模块（CDM）或基本驱动模块（BDM）。牵引应用和电动汽车不包括在内。不包括CISPR 11:20 15中定义为第2组的设备。本文件未给出PDS内在电气和机械形式之间转换功率的电机的要求。IEC 60034系列涵盖了旋转电机的要求。在本文中，术语“马达”用于描述电机，无论是旋转的还是线性的，并且与功率流的方向无关。本文件适用于带或不带无线电功能的BDM、CDM、PDS和MTs。然而，该文件没有规定任何无线电发射和接收要求。本文件定义了0 Hz至400 GHz频率范围内发射和抗扰度的最低要求。在没有规定要求的频率范围内，不需要进行测试。这第四版取消并取代了2017年出版的第三版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:将范围扩展到具有一个或多个嵌入式PD的机床；将辐射抗扰度测试的频率范围扩展到6 GHz；规范性部分和信息性附件的一般更新。
IEC 61800-3:2022 specifies electromagnetic compatibility (EMC) requirements for adjustable speed power drive systems (PDSs) and machine tools (MTs). A PDS is an AC or DC motor drive including an electronic converter. Requirements are stated for AC and DC PDSs and MTs with input and/or output voltages (line-to-line voltage), up to 35 kV AC RMS. This document applies to equipment of all power ratings.
As a product EMC standard, this document can be used for the assessment of PDS and MT. It can also be used for the assessment of complete drive modules (CDM) or basic drive modules (BDM).
Traction applications and electric vehicles are excluded. Equipment which is defined as group 2 in CISPR 11:2015 is excluded.
This document does not give requirements for the electrical machine which converts power between the electrical and mechanical forms within the PDS. Requirements for rotating electrical machines are covered by the IEC 60034 series. In this document, the term "motor" is used to describe the electrical machine, whether rotary or linear, and regardless of the direction of power flow.
This document is applicable to BDMs, CDMs, PDSs and MTs with or without radio function. However, this document does not specify any radio transmission and reception requirements.
This document defines the minimum requirements for emission and immunity in the frequency range from 0 Hz to 400 GHz. Tests are not required in frequency ranges where no requirements are specified.
This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- extension of the scope to machine tools with one or more embedded PDS;
- extension of the frequency range for radiated immunity tests to 6 GHz;
- general updates in the normative part and the informative annexes.
标准预览图
