IEC 62841-2-1:2017 电动手动工具 可运输工具和草坪和花园机械 - 安全 - 第2-1部分:手持钻机和冲击钻具的特殊要求

标准编号：IEC 62841-2-1:2017

中文名称：电动手动工具 可运输工具和草坪和花园机械 - 安全 - 第2-1部分:手持钻机和冲击钻具的特殊要求

英文名称：Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills

发布日期：2017-06-22

标准范围

IEC 62841-2-1:20 17适用于手持钻头和冲击钻头，包括金刚石取芯钻头。本标准也适用于可通过连接螺丝刀头来驱动螺钉的钻头。单相交流的额定电压不大于250 V。或者华盛顿。工具和480 V三相交流电。工具。额定输入不大于3 700 W。K.1和L.1中给出了本标准对电池工具的适用性限值。本标准涉及所有人员在正常使用和合理可预见的误用工具时遇到的工具带来的危害。手持式电动工具，可安装在支架或工作台上作为固定工具使用，而无需对工具本身进行任何改动，均属于本标准的范围，且这种手-保持的工具和支撑件被认为是可运输的工具，因此被相关部件3覆盖。本标准不适用于旋转锤，即使它们可以用作钻头。本第2-1部分将与IEC 62841-1:20 14第一版一起使用。请国家委员会注意，设备制造商和测试组织在新的、修订的或修订的IEC出版物出版后可能需要一个过渡期，以便根据新的要求制造产品，并为进行新的或修订的测试做好准备。委员会建议，该出版物的内容应在出版之日起36个月内通过，以便在全国范围内实施关键词:钻头冲击钻手持工具安全

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.
This standard does not apply to rotary hammers, even if they can be used as a drill.
This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication
Key words: Drill, Impact Drill, Hand-held tool, Safety

标准预览图