IEC 62715-5-3:2017 柔性显示设备.第5-3部分:图像质量和缺陷的视觉评定

标准编号：IEC 62715-5-3:2017

中文名称：柔性显示设备.第5-3部分:图像质量和缺陷的视觉评定

英文名称：Flexible display devices - Part 5-3: Visual assessment of image quality and defects

发布日期：2017-05-10

标准范围

IEC 62715-5-3:20 17（E）提供了执行柔性显示设备视觉评估的框架和程序。本文件规定的视觉评估适用于以下状态的柔性显示模块:-在标准环境条件下的初始状态和老化状态，-机械或环境应力条件，-在机械耐久性测试之后、在环境耐久性测试之后以及在机械和环境耐久性测试的组合之后的状态。通过将测试样品与限度样品或一组等级样品进行比较来进行目视评估。本文件提供了使用极限样本或一组等级样本进行目视评估的框架和程序。本文件描述了制备限度样品和一组等级样品时遵循的框架和程序。本文件还描述了当极限样品和等级样品无法用于同一类型缺陷时的目视评估。本文档提供了可用于视觉评估的测试模式集。

IEC 62715-5-3:2017(E) provides the framework and procedures for performing the visual assessment of flexible display devices.
Visual assessment stipulated in this document is applicable to flexible display modules in the following states:
- initial states and ageing states under standard ambient conditions,
- mechanically or environmentally stressed conditions,
- states after mechanical endurance test(s), after environmental endurance test(s) and after a combination of mechanical and environmental endurance tests.
Visual assessment is performed by comparing a test sample to a limit sample or to a set of grade samples. This document provides the framework and procedures for visual assessments that use a limit sample or a set of grade samples. This document describes the framework and procedure that are followed while preparing limit samples and a set of grade samples. This document also describes visual assessment when limit samples and grade samples are not available for the same type of defect.
This document provides sets of test patterns that can be used in visual assessments.

标准预览图