IEC 61747-30-3:2019 液晶显示器件第30-3部分:液晶显示模块的测量方法有源矩阵液晶显示模块的运动伪影测量

标准编号：IEC 61747-30-3:2019

中文名称：液晶显示器件第30-3部分:液晶显示模块的测量方法有源矩阵液晶显示模块的运动伪影测量

英文名称：Liquid crystal display devices - Part 30-3: Measuring methods for liquid crystal display modules - Motion artefact measurement of active matrix liquid crystal display modules

发布日期：2019-08-21

标准范围

IEC 61747-30-3:20 19(E)适用于透射型有源矩阵液晶显示器。本文件定义了与透射式薄膜晶体管（TFT）LCD运动性能相关的质量评估的一般程序。它定义了运动图像中的伪影和运动伪影测量的方法。注意:本文档中介绍的运动模糊测量方法和分析方法由于其复杂性而不是所有不同LCD运动增强技术的通用工具。提请用户注意这一事实。本第一版取消并取代2011年发布的IEC 61747-6-3第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:a)增加了测试位置和区域；b)修订的标准测量条件；c)增加了眼睛的线展函数标准差的计算；d)增加了对高速摄像机的要求；e)将第1条中的“液晶显示器”改为“透射式TFT液晶显示器”。

IEC 61747-30-3:2019(E) applies to transmissive type active matrix liquid crystal displays.
This document defines general procedures for quality evaluation related to the motion performance of transmissive thin film transistor (TFT) LCDs. It defines artefacts in the moving image and methods for motion artefact measurement.
NOTE Motion blur measurement methods and analysis methods introduced in this document are not universal tools for all the different LCD motion enhancement technologies due to their complexity. Users’ attention is drawn to this fact.
This first edition cancels and replaces the first edition of IEC 61747-6-3 published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) added test positions and areas;
b) revised standard measuring conditions;
c) added calculation of the standard deviation of the line-spread function of the eye;
d) added requirements for high speed camera;
e) changed “LCDs” to “transmissive TFT LCDs” in Clause 1.

标准预览图