ISO 19885-1:2024 气态氢 氢燃料车辆的加气规程 第1部分：加气规程的设计和开发过程

标准编号：ISO 19885-1:2024

中文名称：气态氢 氢燃料车辆的加气规程 第1部分：加气规程的设计和开发过程

英文名称：Gaseous hydrogen — Fuelling protocols for hydrogen-fuelled vehicles — Part 1: Design and development process for fuelling protocols

发布日期：2024-05

标准范围

本文件涉及向具有压缩氢燃料储存的车辆分配压缩氢气的燃料补充协议的设计和开发。该文件没有涉及向具有基于氢化物的储氢系统的车辆分配压缩氢气以及液化或低温压缩氢气的分配。本文件旨在用于广泛的应用，包括但不限于以下应用:—？轻型、中型、重型道路车辆，—？摩托车和三轮车、手推车和拖车，—？越野车、—？叉车和其他工业卡车，—？轨道机车和动力车，—？飞机和无人机，以及—？海船、小船和驳船。本文件适用于广泛的开发情况，从为其特定产品或应用开发燃料协议的公司到制定共识的标准开发组织(SDO)-基于燃料协议的工业或商业市场的广泛部分。此外，这两个极端之间的组合是可能的，例如，公司开始设计和开发，作为定义SDO的新工作提案的一种方式，以完成开发，并将文档作为基于共识的标准发布（包括符合本文档的技术理由）。本文件定义了加油协议的设计和开发要求。这些要求可以集成到现有的设计和开发过程中，以确保加油协议得到充分验证，并且生成的文档足以在目标应用的分配系统中正确实施和安全使用加油协议。除了解决一般应用的燃料协议的设计和开发外，附件？a根据ISO 19880-1提供了与公共加油站道路车辆加油协议相关的具体要求和信息。

This document addresses the design and development of fuelling protocols for compressed hydrogen gas dispensing to vehicles with compressed hydrogen storage of fuel.

The document does not address dispensing of compressed hydrogen gas to vehicles with hydride-based hydrogen storage systems as well as the dispensing of liquefied or cryo-compressed hydrogen.

This document is intended to be used for a wide range of applications including, but not limited to, the following:

—    light, medium, and heavy-duty road vehicles,

—    motor bicycles and tricycles, carts, and trailers,

—    off-road vehicles,

—    fork-lift and other industrial trucks,

—    rail locomotives and powered cars,

—    airplanes and drones, and

—    maritime ships, boats, and barges.

This document applies to a wide spectrum of development situations ranging from companies developing a fuelling protocol for their specific products or applications to standards development organizations (SDOs) developing a consensus-based fuelling protocol for a broad segment of the industrial or commercial market. Additionally, combinations between the two extremes are possible, where, for example, companies start design and development as a way of defining a proposal for new work by an SDO to complete development and publish the document as a consensus-based standard (including technical justification for compliance to this document).

This document defines requirements for the design and development of the fuelling protocols. These requirements can be integrated into the existing design and development processes to ensure that the fuelling protocol is fully verified and that the generated documentation is sufficient for the proper implementation and safe use of the fuelling protocols in dispensing systems for the targeted application.

In addition to addressing the design and development of fuelling protocols for general applications, Annex A provides specific requirements and information relative to fuelling protocols for road vehicles at public fuelling stations based on ISO 19880-1.

标准预览图