ISO/ASTM 51956:2005 有关放射处理中热致发光剂量测定（TLD）系统使用规范

标准编号：ISO/ASTM 51956:2005

中文名称：有关放射处理中热致发光剂量测定（TLD）系统使用规范

英文名称：Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing

发布日期：2005-05

标准范围

ISO/ASTM 51956:2005涵盖了使用热释光剂量计（TLD）测定光子或电子辐照材料的吸收剂量（根据对水的吸收剂量）的程序。它涵盖了允许在以下条件下测量吸收剂量的系统:吸收剂量范围为1Gy至100kGy；吸收剂量率在1 × 10-2和1 × 1010 Gy·s-1之间；光子和电子的辐射能量范围为0.1至50MeV。不包括接受中子辐照的材料的吸收剂量和吸收剂量率测量。

ISO/ASTM 51956:2005 covers procedures for the use of thermoluminescence dosimeters (TLDs) to determine the absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose to water. It covers systems that permit absorbed dose measurements under the following conditions: the absorbed-dose range is from 1 Gy to 100 kGy; the absorbed-dose rate is between 1 x 10^-2 and 1 x 10¹⁰ Gy s^-1; the radiation energy range for photons and electrons is from 0,1 to 50 MeV. Absorbed dose and absorbed-dose rate measurements in materials subjected to neutron irradiation are not covered.

标准预览图