ISO 15439-3:2007 最大工作压力≤0.4MPa（4bar）的气态燃料供给用塑料管道系统 聚酰胺（PA） 第3部分：配件

标准编号：ISO 15439-3:2007

中文名称：最大工作压力≤0.4MPa（4bar）的气态燃料供给用塑料管道系统 聚酰胺（PA） 第3部分：配件

英文名称：Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 3: Fittings

发布日期：2007-12

标准范围

ISO 15439-3:20 07规定了根据ISO 15439-1由聚酰胺制成的配件的物理和机械特性，这些配件旨在埋入并用于供应气体燃料，最大工作压力高达4巴（包括4巴）。它还为它所引用的测试方法指定测试参数。ISO 15439-3:20 07还规定了配件尺寸和标记的要求。与ISO 15439-1和ISO 15439-2一起，它适用于PA配件、它们的接头以及带有PA部件的接头。这些配件可以是以下类型:溶剂水泥套筒配件；溶剂水泥龙头配件；溶剂水泥鞍形配件。

ISO 15439-3:2007 specifies the physical and mechanical characteristics of fittings made from polyamide in accordance with ISO 15439-1, intended to be buried and used for the supply of gaseous fuels for maximum operating pressure up to and including 4 bar.It also specifies the test parameters for the test methods to which it refers.ISO 15439-3:2007 also lays down requirements for dimensions and the marking of fittings.In conjunction with ISO 15439-1 and ISO 15439-2 it is applicable to PA fittings, their joints and to joints with components of PA.These fittings can be of the following types:

• solvent cement socket fittings;
• solvent cement spigot fittings;
• solvent cement saddle fittings.

标准预览图