DIN 标准大全_德国 DIN 标准查询
- DIN EN 301843-7:2018-09 ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard for electromagnetic compatibility - Part 7: Specific conditions for Maritime Broadband Radiolink equipment (Endorsement of the English version EN 301 843-7 V1.1.1 (2017-11) as a German standard)
- DIN 6437-1:1990-06 Pickaxe handles; dimensions, requirements, testing
- DIN EN 15651-3:2012-12 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints; German version EN 15651-3:2012
- DIN EN 13203-6:2022-11 Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps; German version EN 13203-6:2022
- DIN EN 301489-20:2020-02 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS) - Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU (Endorsement of the English version EN 301 489-20 V2.1.1 (2019-04) as a German standard)
- DIN EN 301893:2017-09 5 GHz RLAN - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (Endorsement of the English version EN 301 893 V2.1.1 (2017-05) as German standard)
- DIN EN 13727:2012-07 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1); German version EN 13727:2012
- DIN 14555-1:2003-10 Vehicles carrying tools and gears - Part 1: General requirements
- DIN 65240:2002-11 Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 °C
- DIN EN ISO 898-1:2009-08 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2009); German version EN ISO 898-1:2009
- DIN ISO 11418-2:2017-04 Containers and accessories for pharmaceutical preparations - Part 2: Screw-neck glass bottles for syrups (ISO 11418-2:2016)
- DIN 6814-7:1992-02 Terms and definitions in the field of radiological techniques; technical means for diagnostic use of X-ray radiation in medicine
- DIN EN ISO 14922-1:1999-08 Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999); German version EN ISO 14922-1:1999
- DIN EN 60512-26-100:2009-07 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008); German version EN 60512-26-100:2008
- DIN EN ISO 7784-2:2016-12 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016); German version EN ISO 7784-2:2016
- DIN ISO 20774:2017-03 Cigarettes - Determination of carbon monoxide in sidestream smoke - Method using a routine analytical linear smoking machine equipped with a fishtail chimney (ISO 20774:2013)
- DIN EN 1870-9:2013-01 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading; German version EN 1870-9:2012
- DIN EN ISO 4264:2007-11 Petroleum products - Calculation of cetane index of middle-distillate fuels by four-variable equation (ISO 4264:2007); German version EN ISO 4264:2007
- DIN EN IEC 62769-115-2:2022-09 Field device integration (FDI) - Part 115-2: Profiles - Modbus-RTU (IEC 62769-115-2:2020); English version EN IEC 62769-115-2:2020
- DIN 55350-33:1993-09 Concepts to quality management and statistics; concepts of statistical process control (SPC)
- DIN EN 1023-1:1996-05 Office furniture - Screens - Part 1: Dimensions; German version EN 1023-1:1996
- DIN ISO 3158:2018-07 Timekeeping instruments - Symbolization of control positions (ISO 3158:1976)
- DIN 8615-3:1979-11 Machine Tools; Milling Machines with Horizontal Spindle and Fixed Table; Acceptance Conditions
- DIN EN 60728-7-3:2010-03 Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) (IEC 60728-7-3:2009); English version EN 60728-7-3:2009
- DIN ISO 20785-2:2016-08 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011)
- DIN EN ISO 11126-9:2005-03 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
- DIN 13114-1:2019-12 Medical instruments - Part 1: Scissors type Mayo, without carbide inserts
- DIN EN ISO 9241-300:2009-06 Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements (ISO 9241-300:2008); German version EN ISO 9241-300:2008
- DIN 13197:2005-12 Medical instruments - Nasal and ear polypi forceps type Hartmann
- DIN EN 6059-501:2011-06 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test; German and English version EN 6059-501:2010
