DIN 标准大全_德国 DIN 标准查询
- DIN SPEC 91391-2:2019-04 Common Data Environments (CDE) for BIM projects - Function sets and open data exchange between platforms of different vendors - Part 2: Open data exchange with Common Data Environments
- DIN EN ISO 14585:2011-05 Hexalobular socket pan head tapping screws (ISO 14585:2011); German version EN ISO 14585:2011
- DIN EN 15436-2:2015-09 Road service area maintenance equipment - Part 2: Performance assessment; German version EN 15436-2:2015
- DIN 53770-5:2007-09 Pigments and extenders - Determination of matter soluble in hydrochloric acid - Part 5: Lead content
- DIN 45513-1:1982-07 DIN calibration-tape 76 for magnetic tape with 6,3 mm width
- DIN ISO 13862:2023-08 Machinery for forestry - Feller-bunchers - Terms, definitions and commercial specifications (ISO 13862:2022)
- DIN 31061:2017-11 General requirements for the examination of martial arts
- DIN EN 13774:2013-05 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements; German version EN 13774:2013
- DIN EN 15566:2016-12 Railway applications - Railway rolling stock - Draw gear and screw coupling; German version EN 15566:2016
- DIN EN ISO 7539-9:2008-08 Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2003); German version EN ISO 7539-9:2008
- DIN EN 4700-002:2022-04 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bars and sections; German and English version EN 4700-002:2021
- DIN EN 12312-15:2009-08 Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors; German version EN 12312-15:2006+A1:2009
- DIN EN ISO 5349-1:2001-12 Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001); German version EN ISO 5349-1:2001
- DIN EN ISO 15985:2018-02 Plastics - Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions - Method by analysis of released biogas (ISO 15985:2014); German version EN ISO 15985:2017
- DIN EN 60512-16-6:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (IEC 60512-16-6:2008); German version EN 60512-16-6:2008
- DIN 3761-5:1984-01 Rotary shaft lip type seals for automobils; test; measuring requirements and -instruments
- DIN ISO 7802:2008-10 Metallic Materials - Wire - Wrapping test (ISO 7802:1983)
- DIN EN IEC 63093-6:2019-04 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies (IEC 63093-6:2018); German version EN IEC 63093-6:2018
- DIN EN 12697-20:2020-05 Bituminous mixtures - Test methods - Part 20: Indentation using cube or Marshall specimens; German version EN 12697-20:2020
- DIN EN ISO 20749:2023-10 Dentistry - Pre-capsulated dental amalgam (ISO 20749:2023); German version EN ISO 20749:2023
- DIN EN ISO 9223:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (ISO 9223:2012); German version EN ISO 9223:2012
- DIN EN ISO 19076:2016-12 Leather - Measurement of leather surface - Using electronic techniques (ISO 19076:2016); German version EN ISO 19076:2016
- DIN EN 14420-8:2013-09 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system); German version EN 14420-8:2013
- DIN EN ISO 2819:1995-01 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:1980); German version EN ISO 2819:1994
- DIN 9757-1:1993-07 Office machines; calculators; terms and classification
- DIN 43237:1985-04 Cam control switches for traction equipment
- DIN CEN/TS 15398:2016-04 Resilient, textile and laminate floor coverings - Floor covering standard symbols; German version CEN/TS 15398:2016
- DIN EN 61935-2:2011-06 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards (IEC 61935-2:2010); German version EN 61935-2:2010
- DIN EN ISO 1833-26:2013-07 Textiles - Quantitative chemical analysis - Part 26: Mixtures of melamine and cotton or aramid fibres (method using hot formic acid) (ISO 1833-26:2013); German version EN ISO 1833-26:2013
- DIN EN ISO 17892-11:2021-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019); German version EN ISO 17892-11:2019