DIN 标准大全_德国 DIN 标准查询
- DIN EN 4652-320:2018-02 Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard; German and English version EN 4652-320:2017
- DIN EN 50173-5:2011-09 Information technology - Generic cabling systems - Part 5: Data centres; German version EN 50173-5:2007 + A1:2010 + AC:2011
- DIN SPEC 18071:2014-03 Commercial production greenhouses
- DIN 18177-1:2020-12 Wet-felt factory-produced mineral panels - Part 1: Dimensions, requirements and testing
- DIN ISO 10787-2:1998-02 Textile machinery and accessories - Heald frames - Part 2: Heald-carrying rod fixed directly on the frame stave - Coordinated dimensions (ISO 10787-2:1994)
- DIN 14011/A1:2017-04 Firefighting and fire protection - Terms; Amendment A1
- DIN EN ISO 14556:2017-05 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015); German version EN ISO 14556:2015
- DIN EN ISO/IEC 27017:2021-11 Information technology - Security techniques - Code of practice for information security controls based on ISO/IEC 27002 for cloud services (ISO/IEC 27017:2015); German version EN ISO/IEC 27017:2021
- DIN EN 10307:2002-03 Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method); German version EN 10307:2001
- DIN EN 319412-2:2016-09 Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 2: Certificate profile for certificates issued to natural persons (Endorsement of the English version EN 319 412-2 V2.1.1 (2016-02) as German standard)
- DIN EN ISO 16047:2005-10 Fasteners - Torque/clamp force testing (ISO 16047:2005); German version EN ISO 16047:2005
- DIN EN 4495:2007-03 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006
- DIN 6444:2021-01 Wood bits - Auger bits
- DIN EN 301091-1:2007-05 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices - Road Transport and Traffic Telematics (RTTT) - Radar equipment operating in the 76 GHz to 77 GHz range - Part 1: Technical characteristics and test methods for radar equipment operating in the 76 GHz to 77 GHz range (Endorsement of the English version EN 301091-1 V1.3.3 (2006-11) as German standard)
- DIN ISO 14490-5:2018-05 Optics and photonics - Test methods for telescopic systems - Part 5: Test methods for transmittance (ISO 14490-5:2017)
- DIN EN 12047:1996-11 Solid fertilizers - Measurement of static angle of repose (ISO 8398:1989, modified); German version EN 12047:1996
- DIN 6803-2:2020-12 Dosimetry for Photon Brachytherapy - Part 2: Radiation sources, source calibration, source test and dose calculation
- DIN EN ISO 3210:2025-12 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2025); German version EN ISO 3210:2025
- DIN CEN/TS 17062:2018-01 Foods of plant origin - Multimethod for the determination of pesticide residues in vegetable oils by LC-MS/MS; German version CEN/TS 17062:2017
- DIN 8589-3:2003-09 Manufacturing processes chip removal - Part 3: Milling; Classification, subdivision, terms and definitions
- DIN EN 12034:1996-07 Self adhesive tapes - Measurement of the length of a roll of adhesive tape; German version EN 12034:1996
- DIN EN ISO 24342:2019-03 Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles (ISO 24342:2018); German version EN ISO 24342:2018
- DIN EN 4004:2007-07 Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm; German and English version EN 4004:2007
- DIN EN 16081:2011-11 Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing; German version EN 16081:2011
- DIN EN ISO 8331:2017-03 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016); German version EN ISO 8331:2016
- DIN 3401:1966-06 Drip-feed lubricators and cups; main dimensions
- DIN EN 2515:1991-07 Aerospace series; rod ends, adjustable single fork and threaded shank; dimensions and loads
- DIN EN 302858-2:2011-12 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Road Transport and Traffic Telematics (RTTT) - Short range radar equipment operating in the 24,05 GHz to 24,25 GHz frequency range for automotive application - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (Endorsement of the English version EN 302858-2 V1.2.1 (2011-07) as German standard)
- DIN 6930-1:2010-01 Stamped steel parts - Part 1: Technical delivery conditions
- DIN EN 16602-60-02:2014-12 Space product assurance - ASIC and FPGA development; English version EN 16602-60-02:2014
