DIN 标准大全_德国 DIN 标准查询
- DIN EN ISO 7042:2024-07 - Draft Fasteners - Prevailing torque hexagon nuts - High nuts (all metal) (ISO/DIS 7042:2024); German and English version prEN ISO 7042:2024
- DIN EN 61606-2:2010-05 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 2: Consumer use (IEC 61606-2:2009); German version EN 61606-2:2009
- DIN EN 15269-4:2022-10 - Draft Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 4: Fire resistance of hinged and pivoted glass doorsets; German and English version prEN 15269-4:2022
- DIN EN 13848-6:2024-10 - Draft Railway applications - Track - Track geometry quality - Part 6: Characterisation of track geometry quality; German and English version prEN 13848-6:2024
- DIN 67510-4:2008-02 Phosphorescent pigments and products - Part 4: Products for phosphorescent escape route systems - Markings and applications
- DIN EN 12444:2020-11 - Draft Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation; German and English version prEN 12444:2020
- DIN 55468-2:2004-08 Packaging materials - Corrugated board - Part 2: Wet strength, requirements, testing
- DIN 86087:2008-02 Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections
- DIN 74101-2:1981-09 Steering wheels for commercial vehicles with recess for horn control knop
- DIN 72550:1991-06 Unscreened high-tension ignition cable assemblies; general requirements and test methods
- DIN EN ISO 7436:2023-04 - Draft Fasteners - Slotted set screws with cup point (ISO/DIS 7436:2023); German and English version prEN ISO 7436:2023
- DIN EN 71-13/A1:2021-11 - Draft Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games; German and English version EN 71-13:2021/prA1:2021
- DIN 23311-1:1985-06 Knee pads for mining; rubber knee pads
- DIN 48050-1:1963-05 Insulator pin, conical
- DIN 60410:1983-01 Worsted yarns
- DIN EN 1148:1998-12 Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data; German version EN 1148:1998
- DIN EN 2157-3:1993-10 Aerospace series; steel; forging stock and forgings; technical specification; part 3: pre-production and production forgings; German version EN 2157-3:1993
- DIN EN 301358:2000-04 Satellite Earth Stations and Systems (SES) - Satellite User Terminals (SUT) using satellites in geostationary orbit operating in the 19,7 GHz to 20,2 GHz (space-to-earth) and 29,5 GHz to 30 GHz (earth-to-space) frequency bands (Endorsement of the English version EN 301358 V 1.1.1 (1999-04) as German standard)
- DIN EN 12368:2019-01 - Draft Traffic control equipment - Signal heads; German and English version prEN 12368:2019
- DIN EN ISO 15883-2:2023-05 - Draft Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for critical and semi-critical medical devices (ISO/DIS 15883-2:2023); German and English version prEN ISO 15883-2:2023
- DIN CLC/TS 60034-18-42:2011-07 Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters (IEC/TS 60034-18-42:2008); German version CLC/TS 60034-18-42:2011
- DIN 18500-1:2022-10 Cast stone - Part 1: Terminology, requirements, testing
- DIN 74313-2:1994-06 Non-soldering compression fittings; reducers; type C and D
- DIN EN ISO 16828:2024-07 - Draft Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique for detection and sizing of discontinuities (ISO/DIS 16828:2024); German and English version prEN ISO 16828:2024
- DIN 17560-1:2004-02 Ferrosilicon and Silicon - Part 1: Technical delivery conditions for ferrosilicon
- DIN 87341:1980-04 Remote control gear with transmission tubing for manual operation; installation
- DIN 44954-2:1991-08 Electrical kitchen machines; tin openers; characteristics of performance, tests
- DIN 47636-1:1986-01 Separable accessories for power cable for bushing with outside cone; Uₘ up to 36 kV, bushing with mounting flange and eyelet-fastening for the separable connector
- DIN EN 13001-3-8:2018-06 - Draft Cranes - General design - Part 3-8: Limit states and proof competence of machinery - Shafts; German and English version prEN 13001-3-8:2018
- DIN ETS 300585:2001-04 Digital cellular telecommunications system (Phase 2) - Use of Data Terminal Equipment-Data Circuit terminating Equipment (DTE-DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS) (Endorsement of the English version ETS 300585:1997-04 as German standard)
