DIN 标准大全_德国 DIN 标准查询
- DIN EN 60794-3-40:2009-08 Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers (IEC 60794-3-40:2008); German version EN 60794-3-40:2008
- DIN EN ISO 14644-17:2019-11 - Draft Cleanrooms and associated controlled environments - Part 17: Particle deposition rate applications (ISO/DIS 14644-17:2019); German and English version prEN ISO 14644-17:2019
- DIN EN 62457:2008-07 Multimedia home networks - Home network communication protocol over IP for multimedia household appliances (IEC 62457:2007); German version EN 62457:2008
- DIN 51290-2:1991-05 Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds
- DIN EN ISO 12460-2:2024-12 - Draft Wood-based panels - Determination of formaldehyde release - Part 2: Small-scale chamber method (ISO 12460-2:2024); German and English version prEN ISO 12460-2:2024
- DIN EN 62569-1:2018-06 Generic specification of information on products by properties - Part 1: Principles and method (IEC 62569-1:2017); German version EN 62569-1:2017
- DIN 30784-1:1986-12 Transportation chain; transportation chain for money and securities; modular coordination
- DIN 55428-2:1998-07 Packaging materials - Solid fibreboard - Part 2: Wet strength; requirements, testing
- DIN 86044-1:2010-01 Exhaust gas lines on ships - Flanges - Part 1: Heavy design
- DIN EN ISO 23977-1:2022-01 Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020); German version EN ISO 23977-1:2021
- DIN 52310-2:1991-01 Headform impact test on safety glazing materials for road vehicles with decleration measurement
- DIN ISO 603-16:2000-05 Bonded abrasives products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools (ISO 603-16:1999)
- DIN 695:1986-07 Grade 2 chain slings with hook or ring type terminal fittings
- DIN EN 17019:2016-09 - Draft Weigh-in-Motion of road vehicles - Requirements; English version FprEN 17019:2016
- DIN ISO 1089:1985-10 Electrode taper fits for spot welding equipment; dimensions; identical with ISO 1089, edition 1980
- DIN EN 17670-1:2021-06 - Draft Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Manholes, inspection chambers and road gullies for storm water systems made of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for storm water manholes and inspection chambers; German and English version prEN 17670-1:2021
- DIN 19808:1977-09 Cast iron special castings for asbestos cement pressure pipelines; plugs
- DIN EN 2349-305:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time; German and English version EN 2349-305:2006
- DIN 41649-1:1976-01 Link and test connector 2 mm ∅ for printed circuits; dimensions and mounting instructions
- DIN 1180:1971-11 Drain pipes of clay; dimensions, general quality requirements and test methods
- DIN SPEC 91222:2010-11 Information technology - Platform and programming language independent interoperability
- DIN 81419:2016-09 Holders for curtain rods
- DIN 51433:1992-05 Testing of used oils; determination of the mineral oil content of used oil; infrared spectrometric method
- DIN EN 3545-003:2025-01 - Draft Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard; German and English version prEN 3545-003:2024
- DIN 48124-2:1980-05 Liquid cooled bushings for hydrogen cooled generators
- DIN EN 589/A1:2021-06 - Draft Automotive fuels - LPG - Requirements and test methods; German and English version EN 589:2018/prA1:2021
- DIN 44902-4:1972-08 Non-thermal storage water heaters for wall mounting; thermally insulated or lightly insulated, ratings for open-outlet type
- DIN ISO 23139:2024-07 Biological equipment for treating air and other gases - Requirements and application guidance for deodorization in wastewater treatment plants (ISO 23139:2023)
- DIN EN 60745-2-3:2012-02 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified + A1:2010, modified + A1:2010/corrigendum Feb. 2011); German version EN 60745-2-3:2011
- DIN EN ISO 20863:2018-08 Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO 20863:2018); German version EN ISO 20863:2018
