DIN 标准大全_德国 DIN 标准查询
- DIN EN ISO 22391-3:2010-04 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009); German version EN ISO 22391-3:2009
- DIN EN 61755-3-6:2012-10 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006 + A1:2012); German version EN 61755-3-6:2006 + A1:2012
- DIN ISO 16938-1:2012-12 Building construction - Determination of the staining of porous substrates by sealants used in joints - Part 1: Test with compression (ISO 16938-1:2008)
- DIN EN ISO 2931:2010-12 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2010); German version EN ISO 2931:2010
- DIN EN 302-3:2013-06 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength; German version EN 302-3:2013
- DIN EN 912:2001-02 Timber fasteners - Specifications for connectors for timber (includes corrigendum AC:2000); German version EN 912:1999 + AC:2000
- DIN EN 12390-8:2009-07 Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2009
- DIN EN 1080:2006-03 Impact protection helmets for young children; German version EN 1080:1997 + A1:2002 + A2:2005
- DIN 55405:2006-11 Packaging - Terminology - Terms and definitions
- DIN EN 1834-3:2000-03 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres; German version EN 1834-3:2000
- DIN EN 61169-2:2007-11 Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 (IEC 61169-2:2007); German version EN 61169-2:2007
- DIN EN ISO 16474-2:2014-03 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013); German version EN ISO 16474-2:2013
- DIN 7992:2010-09 T-head bolts with large head
- DIN 19569-9:2004-07 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9: Mechanical drainage of sewage sludge
- DIN EN 60745-2-6:2007-02 Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, modified + A1:2006); German version EN 60745-2-6:2003 + A1:2006
- DIN EN ISO 19135-1/A1:2021-05 Geographic information - Procedures for item registration - Part 1: Fundamentals - Amendment 1 (ISO 19135-1:2015/Amd 1:2021); English version EN ISO 19135-1:2015/A1:2021
- DIN 50979:2008-07 Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
- DIN EN 61158-3-14:2008-09 Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements (IEC 61158-3-14:2007); English version EN 61158-3-14:2008, only on CD-ROM
- DIN EN 60068-2-11:2000-02 Environmental testing - Part 2: Tests; test Ka: Salt mist (IEC 60068-2-11:1981); German version EN 60068-2-11:1999
- DIN EN 15259:2008-01 Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report; German version EN 15259:2007
- DIN 51828-1:2000-11 Testing of lubricants and related products - Determination of the rapid biodegradability - Part 1: General
- DIN EN 60317-42:2010-12 Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200 (IEC 60317-42:1997 + A1:2010); German version EN 60317-42:1997 + A1:2010
- DIN EN 14652:2007-09 Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing; German version EN 14652:2005+A1:2007
- DIN EN 13630-10:2005-08 Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords; German version EN 13630-10:2005
- DIN EN 15280:2013-12 Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines; German version EN 15280:2013
- DIN 1999-100:2003-10 Installations for separation of light liquids - Part 100: Requirements on application of installations for separation of light liquids in accordance with DIN EN 858-1 and DIN EN 858-2
- DIN EN ISO 2692:2007-04 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006); German version EN ISO 2692:2006
- DIN EN 4700-003:2011-05 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube; German and English version EN 4700-003:2010
- DIN EN 2032-001:2014-10 Aerospace series - Metallic materials - Part 001: Conventional designation; German and English version EN 2032-001:2014
- DIN EN ISO 13958:2016-03 Concentrates for haemodialysis and related therapies (ISO 13958:2014); German version EN ISO 13958:2015
