DIN 标准大全_德国 DIN 标准查询
- DIN 69909-4:2015-11 Multi-Project Management - Management of project portfolios, programmes and projects - Part 4: Roles
- DIN EN ISO 22088-3:2006-11 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method (ISO 22088-3:2006); German version EN ISO 22088-3:2006
- DIN EN ISO 16967:2015-07 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti (ISO 16967:2015); German version EN ISO 16967:2015
- DIN CLC/TS 61496-2:2008-02 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006); German version CLC/TS 61496-2:2006
- DIN EN 12312-12:2009-08 Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment; German version EN 12312-12:2002+A1:2009
- DIN EN 10132-4:2003-04 Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 4: Spring steels and other applications; German version EN 10132-4:2000 + AC:2002
- DIN ISO 11040-2:2012-10 Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges (ISO 11040-2:2011)
- DIN EN 14399-2:2015-04 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading; German version EN 14399-2:2015
- DIN 18040-2:2011-09 Construction of accessible buildings - Design principles - Part 2: Dwellings
- DIN 14921:2001-07 Canvas bag for lines for fire-brigades
- DIN EN 55016-2-1:2011-09 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements (CISPR 16-2-1:2008 + A1:2010); German version EN 55016-2-1:2009 + A1:2011
- DIN EN ISO 11135-1:2007-08 Sterilization of health care products - Ethylene oxide - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007); German version EN ISO 11135-1:2007
- DIN EN 61672-3:2007-05 Electroacoustics - Sound level meters - Part 3: Periodic tests (IEC 61672-3:2006); German version EN 61672-3:2006
- DIN EN 4165-007:2008-10 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard; German and English version EN 4165-007:2007
- DIN EN ISO 1890:2009-10 Reinforcement yarns - Determination of twist (ISO 1890:2009); German version EN ISO 1890:2009
- DIN EN ISO 16664:2008-11 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2004); German version EN ISO 16664:2008
- DIN 33897-4:2009-12 Workplaces atmospheres - Routine methods for the determination of dustiness of bulk materials - Part 4: Repeated drop in the cross-flow
- DIN EN 61439-4:2013-09 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) (IEC 61439-4:2012); German version EN 61439-4:2013
- DIN EN 61108-3:2011-02 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results (IEC 61108-3:2010); English version EN 61108-3:2010
- DIN ISO 10816-21:2015-08 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 21: Horizontal axis wind turbines with gearbox (ISO 10816-21:2015)
- DIN EN ISO 6506-3:2006-03 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005); German version EN ISO 6506-3:2005
- DIN EN ISO 19232-5:2013-12 Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators (ISO 19232-5:2013); German version EN ISO 19232-5:2013
- DIN EN ISO 15984:2003-04 Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002
- DIN 81208-16:2006-12 Manoeuvring of ships - Part 16: Vertical overshoot trial
- DIN EN ISO 10993-6:2009-08 Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2007); German version EN ISO 10993-6:2009
- DIN EN 15204:2006-12 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique); German version EN 15204:2006
- DIN CEN/TS 14993:2005-05 Swap bodies for combined transport - Stackable swap bodies type A 1371 - Dimensions, design requirements and testing; German version CEN/TS 14993:2005
- DIN 79012:2011-04 Screw threads for bicycles and mopeds - Theoretical values, limiting screw thread dimensions
- DIN EN 15779:2013-12 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥ 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography; German version EN 15779:2009+A1:2013
- DIN ISO 10230:2016-07 Cycles - Splined hub and sprocket - Mating dimensions (ISO 10230:1990)
