DIN 标准大全_德国 DIN 标准查询
- DIN 58235-2:2008-01 Medical instruments - Needle holder type Mayo-Hegar with carbide inserts
- DIN 6815:2013-06 Medical X-ray equipment up to 300 kV - Rules for testing of radiation protection after installation, maintenance and essential modification
- DIN EN 1927-3:2008-06 Qualitative classification of softwood round timber - Part 3: Larches and Douglas fir; German version EN 1927-3:2008
- DIN EN 301786:2003-04 Fixed Radio Systems - Point-to-point equipment - Parameters for digital radio systems for the transmission of digital signals operating at 52 GHz (Endorsement of the English version EN 301786 V 1.2.1 (2001-08) as German standard)
- DIN 27202-2:2014-09 State of railway vehicles - Superstructure and special equipment of vehicles - Part 2: Buffing and draw gear
- DIN EN 894-3:2010-01 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators; German version EN 894-3:2000+A1:2008
- DIN 1961:2010-08 German construction contract procedures (VOB) - Part B: General conditions of contract relating to the execution of construction work
- DIN EN 50125-1 Berichtigung 1:2010-11 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock; German version EN 50125-1:1999, Corrigendum to DIN EN 50125-1 (VDE 0115-108-1):2000-05; German version CENELEC-Cor.:2010 to EN 50125-1:1999
- DIN VDE 0404-1:2002-05 Testing and measuring equipment for checking the electric safety of electric devices - Part 1: General requirements
- DIN EN 15497:2014-07 Structural finger jointed solid timber - Performance requirements and minimum production requirements; German version EN 15497:2014
- DIN EN 10294-2:2012-04 Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties; German version EN 10294-2:2012
- DIN EN 15773:2010-11 Industrial application of powder organic coatings to hot dip galvanized and sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines; German version EN 15773:2009
- DIN ISO 10823:2006-10 Guidelines for the selection of roller chain drives (ISO 10823:2004)
- DIN EN 12457-4:2003-01 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size reduction); German version EN 12457-4:2002
- DIN EN ISO 14175:2008-06 Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008); German version EN ISO 14175:2008
- DIN EN ISO 22892:2011-09 Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry (ISO 22892:2006); German version EN ISO 22892:2011
- DIN EN 2591-701:2002-10 Aerospace series - Elements of electrical and optical connection; Test methods - Part 701: Electrical elements; Measurement of open circuit impedance of couplers; German and English version EN 2591-701:2001
- DIN EN 3475-303:2002-08 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance; German version EN 3475-303:2002
- DIN 22112-2:2010-12 Belt conveyors for underground coal mining - Idlers - Part 2: Requirements
- DIN ISO 5610-6:2015-02 Tool holders with rectangular shank for indexable inserts - Part 6: Style G (ISO 5610-6:2014)
- DIN EN 300113-2:2012-07 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land mobile service - Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (Endorsement of the English version EN 300113-2 V1.5.1 (2011-11) as German standard)
- DIN EN 61168:2000-01 Radiotherapy simulators - Functional performance characteristics (IEC 61168:1993); German version EN 61168:1994
- DIN EN ISO 7500-2:2007-04 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006); German version EN ISO 7500-2:2006
- DIN EN 13871:2011-02 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements; German version EN 13871:2005+A1:2010
- DIN 30645-2:2006-01 Technical delivery conditions for signs - Part 2: Etched signs
- DIN EN ISO 10437:2005-07 Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003); English version EN ISO 10437:2003
- DIN EN 4800-001:2011-06 Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip; German and English version EN 4800-001:2010
- DIN EN 61788-13:2013-02 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (IEC 61788-13:2012); German version EN 61788-13:2012
- DIN EN ISO 5269-2:2005-03 Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Köthen method (ISO 5269-2:2004); German version EN ISO 5269-2:2004
- DIN 14034-6:2016-04 Graphical symbols for fire-brigade - Part 6: Equipments in buildings