IEC 60095-1:2018 铅酸起动电池 - 第1部分:一般要求和测试方法

标准编号：IEC 60095-1:2018

中文名称：铅酸起动电池 - 第1部分:一般要求和测试方法

英文名称：Lead-acid starter batteries - Part 1: General requirements and methods of test

发布日期：2018-11-16

标准范围

IEC 60095-1:20 18作为IEC 60095-1:20 18 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60095-1:20 18适用于标称电压为12 V的铅酸蓄电池，主要用作内燃机启动、照明和内燃机车辆辅助设备的电源。这些电池通常被称为“启动电池”。本文件适用于以下用途的电池:？乘用车用电池；？商用和工业车辆用电池。IEC 60095-1:20 18不适用于其他用途的电池，例如启动轨道车内燃机或摩托车和其他动力运动车辆。IEC 60095-1:20 18定义了铅酸电池的许多一般特性。单个部分可以在IEC 60095系列的其他部分中引用，即使该应用被排除在本文件的范围之外。本文件规定:？一般要求；？必要的功能特性、相关测试方法和结果，对于几类起动机电池:？根据应用的一般类型；？根据产品的类型。IEC 60095-1:20 18取消并取代了2006年发布的第七版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:a)充电验收试验；b)起动性能试验；c)电荷保持试验；和d）增加了耐久性试验。

IEC 60095-1:2018 is available as IEC 60095-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60095-1:2018 is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting, and for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries".
This document is applicable to batteries for the following purposes:
？ batteries for passenger cars;
？ batteries for commercial and industrial vehicles.
IEC 60095-1:2018 is not applicable to batteries for other purposes, such as the starting of railcar internal combustion engines or for motorcycles and other power sport vehicles. IEC 60095-1:2018 defines many general properties of lead-acid batteries. Single sections can be referenced in other parts of the IEC 60095 series even if the application is excluded in the scope of this document. This document specifies the:
？ general requirements;
？ essential functional characteristics, relevant test methods and results required,
for several classes of starter batteries:
？ according to the general type of application;
？ according to the type of product.
IEC 60095-1:2018 cancels and replaces the seventh edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) charge acceptance test;
b) cranking performance test;
c) charge retention test; and
d) endurance test added.

标准预览图