IEC 62287-1:2010 海上导航和无线电通信设备及系统.自动识别系统（AIS）的B级船载设备.第1部分:载波感应时分多址（CSTDMA）技术

标准编号：IEC 62287-1:2010

中文名称：海上导航和无线电通信设备及系统.自动识别系统（AIS）的B级船载设备.第1部分:载波感应时分多址（CSTDMA）技术

英文名称：Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques

发布日期：2010-11-25

标准范围

IEC 62287-1:2010规定了使用CSTDMA技术的B级船载AIS设备的最低操作和性能要求、测试方法和要求的测试结果。本标准考虑了其他相关的IEC国际标准和现有的国家标准（如适用）。适用于《国际海上人命安全公约》第五章AIS强制性运输要求未涵盖的船舶上使用的AIS设备。与第一版相比，主要技术变化如下。对国际电联相关建议的引用已从M.1371-1更新为M.1371-4，并进行了一些相应的小改动。提供短期安全的先前选项-已根据IMO的建议删除了6.5.1.5中的相关消息。6.4中添加了对默认MMSI的新要求，6.8中添加了针对无效控制命令的保护的新要求。一些测试方法已经更新，特别是对一些测试方法中用于测试的频率进行了小幅度修改。

IEC 62287-1:2010 specifies the minimum operational and performance requirements, methods of testing and required test results for Class B shipborne AIS equipment using CSTDMA techniques. This standard takes into account other associated IEC International Standards and existing national standards, as applicable. It is applicable for AIS equipment used on craft that are not covered by the mandatory carriage requirement of AIS under SOLAS Chapter V. The major technical changes with respect to the first edition are the following. The reference to the relevant recommendation of the ITU has been updated from M.1371-1 to M.1371-4 with some consequential small changes. A previous option of providing short safety-related messages in 6.5.1.5 has been removed on advice from the IMO. A new requirement for a default MMSI has been added in 6.4 and a further new requirement for protection from invalid control commands has been added in 6.8. Some test methods have been updated and, in particular, small revisions have been made to the frequencies used for testing in some of the test methods.

标准预览图