IEC 60317-61:2020 特种绕组线规范.第61部分:温度指数为180的聚酯玻璃纤维缠绕、树脂或清漆浸渍、裸或漆包扁铜线

标准编号：IEC 60317-61:2020

中文名称：特种绕组线规范.第61部分:温度指数为180的聚酯玻璃纤维缠绕、树脂或清漆浸渍、裸或漆包扁铜线

英文名称：Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180

发布日期：2020-05-08

标准范围

IEC 60317-61:2020作为IEC 60317-61:2020 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60317-61:2020规定了聚酯玻璃纤维缠绕、树脂或清漆浸渍裸、1级或2级漆包矩形铜绕组线的要求，温度指数180。浸渍剂可以是例如环氧树脂、聚酯或聚酯酰亚胺树脂基的。注意:对于这种类型的导线，热冲击试验是不合适的，因此无法确定热冲击温度。因此，不能指定基于温度指数和热冲击温度要求的等级。本文件涵盖的标称导体尺寸范围为:-宽度:最小。2.0 mm最大16.0 mm；-厚度:最小。最大0.80毫米。5.60毫米。规定的宽度和厚度组合以及规定的宽度/厚度比符合IEC 60317-0-8。第二版取消并取代了2012年出版的第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-修订标准的标题；-修订第1条，范围；-修订3.2.2中聚酯玻璃纤维覆盖层厚度等级的描述。

IEC 60317-61:2020 is available as IEC 60317-61:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60317-61:2020 specifies the requirements of polyester glass-fibre wound, resin or varnish impregnated bare, grade 1 or grade 2 enamelled rectangular copper winding wires, temperature index 180. The impregnating agent can be, for instance, epoxy, polyester, or polyesterimide resin based. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The range of nominal conductor dimensions covered by this document is:
- width: min. 2,0 mm max. 16,0 mm;
- thickness: min. 0,80 mm max. 5,60 mm.
The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-8. This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- revision of the title of the standard;
- revision to Clause 1, Scope;
- revision to the descriptions of grades of thickness of polyester glass-fibre coverings in 3.2.2.

标准预览图