IEC 62150-5:2017 光纤有源器件和器件 - 测试和测量程序第5部分:可调谐变送器的波长通道调谐时间

标准编号：IEC 62150-5:2017

中文名称：光纤有源器件和器件 - 测试和测量程序第5部分:可调谐变送器的波长通道调谐时间

英文名称：Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters

发布日期：2017-05-11

标准范围

IEC 62150-5:20 17规定了可调谐发射机波长信道调谐时间的测试和测量程序。它适用于激光发射器和收发器的发射器部分。此过程检查设备或模块是否满足适当的性能规范。本文所述的方法使用滤光器将输出波长的跃迁转移到光功率的跃迁。这是因为在目标波长通道的稳态稳定之前输出波长的瞬态响应太快而不能使用波长计或光谱分析仪测量。参考滤光片组见附录A。关键词:波长通道调谐时间的测试和测量程序

IEC 62150-5:2017 specifies test and measurement procedures for the wavelength channel tuning time of tuneable transmitters. It applies to laser transmitters, and to the transmitter portion of transceivers. This procedure examines whether the device or module satisfies the appropriate performance specification. The method described in this document uses optical filters to transfer the transition of the output wavelength to the transition of the optical power. This is because the transient response of the output wavelength before stabilization at steady-state of the target wavelength channel is too fast to measure using a wavelength meter or an optical spectrum analyser. Reference optical filter sets are described in Annex A.
Keywords: test and measurement procedures of the wavelength channel tuning time

标准预览图