IEC 61326-2-2:2020 测量 控制和实验室用电气设备 - EMC要求 - 第2-2部分:特殊要求 - 用于低压配电系统的便携式测试 测量和监控设备的测试配置 操作条件和性能标准

标准编号：IEC 61326-2-2:2020

中文名称：测量 控制和实验室用电气设备 - EMC要求 - 第2-2部分:特殊要求 - 用于低压配电系统的便携式测试 测量和监控设备的测试配置 操作条件和性能标准

英文名称：Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in

发布日期：2020-10-23

标准范围

IEC 61326-2-2:20 20作为IEC 61326-2-2:20 20 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 61326-2-2:20 20规定了IEC 61326-1:20 20附录A涵盖的设备的更详细的测试配置、操作条件和性能标准，即:-用于测试、测量或监控低压配电系统中的保护措施，以及；-由电池供电和/或从被测电路供电，以及-手机。此类EUT的示例包括但不限于电压检测器、绝缘测试仪、接地连续性测试仪、接地电阻测试仪、泄漏电流钳、环路阻抗测试仪、“剩余电流设备测试仪”(RCD测试仪)和IEC 61557中定义的相序测试仪(所有部分)。

IEC 61326-2-2:2020 is available as IEC 61326-2-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61326-2-2:2020 specifies more detailed test configurations, operational conditions and performance criteria for equipment covered by Annex A of IEC 61326-1:2020 which is:
- used for testing, measuring or monitoring of protective measures in low-voltage distribution systems, and;
- powered by battery and/or from the circuit measured, and
- portable.
Examples of such EUTs include, but are not limited to, voltage detectors, insulation testers, earth continuity testers, earth resistance testers, leakage current clamps, loop impedance testers, “residual-current-device-testers” (RCD-testers) and phase sequence testers as defined in IEC 61557 (all parts).

标准预览图