IEC 61000-6-3:2006 电磁兼容性（EMC） - 第6-3部分:通用标准 - 住宅 商业和轻工业环境的排放标准

标准编号：IEC 61000-6-3:2006

中文名称：电磁兼容性（EMC） - 第6-3部分:通用标准 - 住宅 商业和轻工业环境的排放标准

英文名称：Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

发布日期：2006-07-17

标准范围

关于EMC发射要求的IEC 61000本部分适用于住宅、商业和轻工业环境中使用的电气和电子设备。涵盖0 Hz至400 GHz频率范围内的发射要求。无需在未规定要求的频率下进行测量。如果没有相关的专用产品或产品系列EMC排放标准，则本通用EMC排放标准适用。本标准适用于直接连接到低压公共电网或连接到专用直流电源的设备，专用直流电源用于设备和低压公共电网之间的接口。本标准还适用于由电池供电或由非公共但非工业的低压配电系统供电的设备，前提是该设备拟用于下述位置。本标准涵盖的环境包括住宅、商业和轻工业场所，包括室内和室外。以下列表虽然不全面，但给出了包含的位置:-住宅物业，例如房屋、公寓；-零售店，例如商店、超市；-营业场所，例如办公室、银行；-公共娱乐场所，例如电影院、公共酒吧、舞厅；-户外场所，例如加油站、停车场、娱乐和体育中心；-轻工业场所，例如车间、实验室、服务中心。从公共电网直接低压供电的场所被视为住宅、商业或轻工业场所。本标准的目的是定义与连续和瞬态、传导和辐射干扰相关的范围内定义的设备的发射试验要求。选择排放要求是为了确保在住宅、商业和轻工业场所正常运行的设备产生的干扰不超过可能阻止其他设备按预期运行的水平。未考虑设备的故障条件。在本标准中，并非所有干扰现象都包含在测试中，但仅包括与本标准所涵盖的设备相关的干扰现象。这些要求代表了基本的电磁兼容性发射要求。对每个考虑的港口都规定了要求。

This part of IEC 61000 for EMC emission requirements applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments.Emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified.This generic EMC emission standard is applicable if no relevant dedicated product or product-family EMC emission standard exists.This standard applies to apparatus intended to be directly connected to a low-voltage public mains network or connected to a dedicated DC source, which is intended to interface between the apparatus and the low-voltage public mains network. This standard applies also to apparatus which is battery operated or is powered by a non-public, but non-industrial, low-voltage power distribution system if this apparatus is intended to be used in the locations described below.The environments encompassed by this standard are residential, commercial and light-industrial locations, both indoor and outdoor. The following list, although not comprehensive, gives an indication of locations that are included:- residential properties, for example houses, apartments;- retail outlets, for example shops, supermarkets;- business premises, for example offices, banks;- areas of public entertainment, for example cinemas, public bars, dance halls;- outdoor locations, for example petrol stations, car parks, amusement and sports centres;- light-industrial locations, for example workshops, laboratories, service centres.Locations that are characterised by being supplied directly at low voltage from the public mains network are considered to be residential, commercial or light-industrial.The object of this standard is to define the emission test requirements for apparatus defined in the scope in relation to continuous and transient, conducted and radiated disturbances.The emission requirements have been selected so as to ensure that disturbances generated by apparatus operating normally in residential, commercial and light-industrial locations do not exceed a level which could prevent other apparatus from operating as intended. Fault conditions of apparatus are not taken into account. Not all disturbance phenomena have been included for testing purposes in this standard but only those considered as relevant for the equipment covered by this standard. These requirements represent essential electromagnetic compatibility emission requirements.Requirements are specified for each port considered.

标准预览图