IEC 63269:2022 海上导航和无线电通信设备及系统.海上幸存者定位装置（人员落水装置）.最低要求 试验方法和要求的试验结果

标准编号：IEC 63269:2022

中文名称：海上导航和无线电通信设备及系统.海上幸存者定位装置（人员落水装置）.最低要求 试验方法和要求的试验结果

英文名称：Maritime navigation and radiocommunication equipment and systems - Maritime survivor locating devices (man overboard devices) - Minimum requirements, methods of testing and required test results

发布日期：2022-05-25

标准范围

IEC 63269:2022规定了ITU-R M.2135 AMRD A组用于警报和定位目的的人员落水(MOB)装置的操作、构造、文件、测试方法和所需测试结果相关方面的最低要求，如由IMO定义并根据ITU？R M.493 M级。本文档由三个模块组成，其中第一个模块模块A涵盖了一般要求和方面。此外，模块B涵盖AIS技术，模块C涵盖MOB设备所需的DSC技术。本文件包含了适用的ITU建议中包含的技术特性。在适用的情况下，它还考虑到国际电联无线电条例。本文件考虑了其他相关的IEC国际标准和现有国家标准（如适用）。本文件定义了AIS和DSC技术在单个设备中共存的要求。只有当设备符合这三个模块时，它才能被归类为AMRD A组设备，并有权在通道AIS 1、通道AIS 2和通道70上运行。

IEC 63269:2022 specifies the minimum requirements for aspects related to operation, construction, documentation, methods of testing and required test results for ITU-R M.2135 AMRD Group A man overboard (MOB) devices intended for alerting and locating purposes, as defined by IMO and in accordance with ITU？R M.493 Class-M. This document consists of three modules where the first module, Module A, covers general requirements and aspects. Further Module B covers AIS technologies and Module C covers DSC technologies that are required within MOB equipment.
This document incorporates the technical characteristics included in applicable ITU recommendations. Where applicable, it also takes into account the ITU Radio Regulations. This document takes into account other associated IEC International Standards and existing national standards, as applicable.
This document defines the requirements for coexistence of AIS and DSC technology incorporated within a single equipment. Only when the equipment complies with the three Modules can it be categorised as AMRD Group A equipment and be entitled to operate on channel AIS 1, channel AIS 2 and channel 70.

标准预览图