IEC 60115-8-1:2014 固定电阻器用于电子设备 - 第8-1部分:空白详细规格:固定表面贴装（Smd）低功率薄膜电阻器一般电子设备 分级G

标准编号：IEC 60115-8-1:2014

中文名称：固定电阻器用于电子设备 - 第8-1部分:空白详细规格:固定表面贴装（Smd）低功率薄膜电阻器一般电子设备 分级G

英文名称：Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G

发布日期：2014-10-17

标准范围

IEC 60115-8-1:20 14适用于起草分类为G级的矩形芯片形状（RR型）或圆柱形MELF形状（RC型）固定表面贴装（SMD）低功率薄膜电阻器的详细规范，IEC 60115-8:20 09 1.5中定义了一般电子设备，通常在良性或中等环境条件下运行，主要要求是功能。G级的示例包括消费产品和电信用户终端。与上一版相比，此版本包括以下重大技术变更:-包括与表格、图表和参考文献有关的小的修订。-专用于产品分类等级G的电阻器，用于一般电子设备，通常在良性或中等环境条件下运行，如e。g.消费品，或电信用户终端。-实施零缺陷政策，在所有测试计划中应用单一评估级别EZ。-用在整个规定温度范围内指定的电阻温度系数（TCR）代替较差和不太显著的温度特性。-增加了针对静电放电的抗扰度测试。-实施稳定性等级概念，对所有规定测试的性能有协调要求。-在其组装过程中添加与部件用户相关的信息。-增加一个附件，对0电阻（跳线）作出特殊规定，该附件可能是从本空白详细规范衍生的详细规范所涵盖的产品范围的一部分。

IEC 60115-8-1:2014 is applicable to the drafting of detail specifications for fixed surface mount (SMD) low-power film resistors in rectangular chip shape (styles RR) or in cylindrical MELF shape (styles RC) classified to level G, which is defined in IEC 60115-8:2009, 1.5 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This edition includes the following significant technical changes with respect to the previous edition:
- It includes minor revisions related to tables, figures and references.
- Dedication to resistors of product classification level G, which is for general electronic equipment, typically operated under benign or moderate environmental conditions, like e.g. consumer products, or telecommunication user terminals.
- Implementation of the zero defect policy with the application of the single assessment level EZ in all test schedules.
- Substitution of the temperature coefficient of resistance (TCR), specified over the full defined temperature range, for the inferior and less significant temperature characteristic.
- Adition of a test for the immunity against electrostatic discharge.
- Implementation of the concept of stability classes with coordinated requirements to the performance at all prescribed tests.
- Addition of information relevant for the component user in his assembly process.
- Addition of an Annex providing special provisions for 0 resistors (jumpers), which may be part of a range of products covered by a detail specification derived from this blank detail specification.

标准预览图