IEC 61755-1:2022 纤维光学互连器件和无源元件.单模光纤连接器光学接口.第1部分:色散非移位光纤的光学接口.总则和指南

标准编号：IEC 61755-1:2022

中文名称：纤维光学互连器件和无源元件.单模光纤连接器光学接口.第1部分:色散非移位光纤的光学接口.总则和指南

英文名称：Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 1: Optical interfaces for dispersion unshifted fibres - General and guidance

发布日期：2022-09-14

标准范围

IEC 61755-1:20 22涵盖色散不移位单模光纤连接接口。它包括参考文献、文档结构细节、定义和标准化光连接等级。等级基于两个光连接器群体之间的随机配对连接，根据所需的特性，包括光纤模场直径（MFD）失配。它还在适当的情况下定义了标准化的测试方法。第二版取消并取代了2005年出版的第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-删除图2、图3和表4，并考虑案文的整个部分；-增加用于多光纤连接器随机配合的测试方法；-引入指定核心位置变体的命名法；-更换有限的MFD范围，其现在符合IEC 60793-2-50中规定的完整MFD范围；-用可靠性技术报告取代对可靠性标准的引用；-该系列的新通用标题。

IEC 61755-1:2022 covers dispersion unshifted single-mode fibre optic connection interfaces. It includes references, document structure details, definitions, and standardised optical connection grades. The grades are based on random mated connections between two optical connector populations according to required characteristics including fibre mode field diameter (MFD) mismatch. It also defines standardized test methods where appropriate. This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- deletion of Figure 2, Figure 3 and Table 4, and consideration of the whole parts of the text;
- addition of the test method for random mating of the multifibre connectors;
- introduction of a nomenclature for the specified core location variants;
- replacement of the limited MFD range, which is now in line with the complete MFD range specified in IEC 60793-2-50;
- replacement of the references to reliability standards to reliability technical reports;
- new general title for the series.

标准预览图