IEC 62619:2017 含有碱性或其他非酸性电解质的二次电池和电池 - 用于工业应用的二次锂电池和电池的安全要求

标准编号：IEC 62619:2017

中文名称：含有碱性或其他非酸性电解质的二次电池和电池 - 用于工业应用的二次锂电池和电池的安全要求

英文名称：Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications

发布日期：2017-02-13

标准范围

IEC 62619:2017规定了工业应用（包括固定应用）中使用的二次锂电池和电池组的安全操作要求和测试。如果存在规定特殊应用中使用的电池的测试条件和要求的IEC标准，并且该标准与本文件相冲突，则以前者为准（例如，道路车辆上的IEC 62660系列）。以下是在本文档的范围内利用电池和电池组的一些应用示例。-固定应用:电信、不间断电源(UPS)、电能存储系统、公用事业开关、应急电源和类似应用。-动力应用:叉车、高尔夫球车、自动导引车(AGV)、铁路和船舶，不包括公路车辆。由于本文件涵盖了用于各种工业应用的电池，因此它包括了各种应用的常见和最低要求。电气安全仅作为第8条风险分析的一部分。关于解决电气安全的细节，必须考虑最终用途应用标准要求。本文件适用于电池和电池组。如果将电池分成更小的单元，则可以将更小的单元作为电池的代表进行测试。制造商明确声明被测试单元。制造商可以将最终电池中存在的功能添加到被测试单元中。

IEC 62619:2017 specifies requirements and tests for the safe operation of secondary lithium cells and batteries used in industrial applications including stationary applications.
When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this document, the former takes precedence (e.g., IEC 62660 series on road vehicles).
The following are some examples of applications that utilize cells and batteries under the scope of this document.
- Stationary applications: telecom, uninterruptible power supplies (UPS), electrical energy storage system, utility switching, emergency power, and similar applications.
- Motive applications: forklift truck, golf cart, auto guided vehicle (AGV), railway, and marine, excluding road vehicles.
Since this document covers batteries for various industrial applications, it includes those requirements, which are common and minimum to the various applications.
Electrical safety is included only as a part of the risk analysis of Clause 8. In regard to details for addressing electrical safety, the end use application standard requirements have to be considered.
This document applies to cells and batteries. If the battery is divided into smaller units, the smaller unit can be tested as the representative of the battery. The manufacturer clearly declares the tested unit. The manufacturer may add functions, which are present in the final battery to the tested unit.

标准预览图