IEC TS 60034-24:2009 旋转电机.第24部分:旋转电机活动部件和轴承电流潜在故障的在线检测和诊断.应用指南

标准编号：IEC TS 60034-24:2009

中文名称：旋转电机.第24部分:旋转电机活动部件和轴承电流潜在故障的在线检测和诊断.应用指南

英文名称：Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide

发布日期：2009-09-16

标准范围

IEC/TS 60034-24:20 09适用于多相旋转电机（感应电机和同步电机）有源部件故障和轴承电流故障的在线检测和诊断。失效分析包括-匝间故障；-相间短路；-星形点接地的电动机的双接地故障和单接地故障；-静态和动态偏心；-保持架缺陷或缺陷(例如断裂的杆或端环)；-轴承电流。

IEC/TS 60034-24:2009 is applicable to the on-line detection and diagnosis of failures at the active parts of multi-phase rotating electrical machines (induction and synchronous machines) and of bearing currents. The failure analysis includes
- inter-turn faults;
- phase-to-phase short-circuits;
- double earth faults and single earth faults of motors with earth connection of the star-point;
- static and dynamic eccentricities;
- cage imperfection or defects (e.g. broken bars or end-rings);
- bearing currents.

标准预览图