IEC 62129-3:2019 波长/光学频率测量仪器的校准.第3部分:内部参考频率梳的光学频率计

标准编号：IEC 62129-3:2019

中文名称：波长/光学频率测量仪器的校准.第3部分:内部参考频率梳的光学频率计

英文名称：Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb

发布日期：2019-05-20

标准范围

IEC 62129-3:20 19描述了使用光学频率梳作为内部参考的光学频率计的校准。它适用于测量从光纤通信行业典型的源发射的光频率的仪器。假设光辐射将通过单模光纤耦合到光频率计。本文件是关于波长/光频率测量仪器校准的IEC 62129系列的一部分。光谱分析仪的校准参照IEC 62129-1[3]，迈克尔逊干涉仪单波长计的校准参照IEC 62129-2[4]。第一版取消并取代了2014年发布的IEC TS 62129-3。与上一版相比，此版本包括以下重大技术变更:a)在5.2.3中添加了关于在第二光学频率下校准的文本；b)附件D现在是规范性的；c)改进了第4.2款；d)频率测量方法移至附录B；e)光学频率梳的示例已移至附录C；f)频率依赖性不确定性已移至附录D。关键词:光学频率计的校准

IEC 62129-3:2019 describes the calibration of optical frequency meters using an optical frequency comb as an internal reference. It is applicable to instruments measuring the optical frequency emitted from sources that are typical for the fibre-optic communications industry. It is assumed that the optical radiation will be coupled to the optical frequency meter by a single-mode optical fibre. This document is part of the IEC 62129 series on the calibration of wavelength/optical frequency measurement instruments. Refer to IEC 62129-1 [3] for the calibration of optical spectrum analyzers, and refer to IEC 62129-2 [4] for calibration of Michelson interferometer single wavelength meters. This first edition cancels and replaces IEC TS 62129-3, published in 2014. This edition includes the following significant technical changes with respect to the previous edition:
a) text has been added to 5.2.3 about calibration at a second optical frequency;
b) Annex D is now normative;
c) Subclause 4.2 has been improved;
d) measurement method of frequency has been moved to Annex B;
e) example of optical frequency comb has been moved to Annex C;
f) frequency-dependence uncertainty has been moved to Annex D.
Keywords: calibration of optical frequency meters

标准预览图