IEC 62899-501-1:2019 印刷电子器件.第501-1部分:质量评定.失效模式和机械试验.柔性和/或弯曲初级或次级电池

标准编号：IEC 62899-501-1:2019

中文名称：印刷电子器件.第501-1部分:质量评定.失效模式和机械试验.柔性和/或弯曲初级或次级电池

英文名称：Printed electronics - Part 501-1: Quality assessment - Failure modes and mechanical testing - Flexible and/or bendable primary or secondary cells

发布日期：2019-01-16

标准范围

IEC？62899-501-1:20 19（E）规定了用于确定IEC中定义的可弯曲或柔性印刷原电池、二次电池和电池组可靠性特性的失效模式和机械应力测试方法？60050-482:2004，482-01-01，IEC？60050？482:2004，482-01-02，IEC？60050-482:2004，482-01-03，IEC？60050-482:2004,482？01-04和IEC？60050-482:2004，482-01-05。IEC中提到了原电池的重要参数和规格？60086-1和IEC？60086-2.IEC？61960-3，以及IEC？61951-1和IEC？61951-2定义了二次单电池和电池组的性能测试、名称、标记、尺寸和其他要求。IEC？62133-1和IEC？62133-2解决了二次电池和电池组的一般安全要求。

IEC？62899-501-1:2019(E) specifies failure modes and mechanical stress test methods for the determination of reliability characteristics of bendable or flexible printed primary cells and secondary cells and batteries as defined in IEC？60050-482:2004, 482-01-01, IEC？60050？482:2004, 482-01-02, IEC？60050-482:2004, 482-01-03, IEC？60050-482:2004, 482？01-04 and IEC？60050-482:2004, 482-01-05, respectively.
Important parameters and specifications for primary cells are mentioned in IEC？60086-1 and IEC？60086-2. IEC？61960-3, as well as IEC？61951-1 and IEC？61951-2 define performance tests, designations, markings, dimensions and other requirements for secondary single cells and batteries. IEC？62133-1 and IEC？62133-2 address general safety requirements of secondary cells and batteries.

标准预览图