IEC 60086-1:2015 主电池 - 第1部分:总则

标准编号：IEC 60086-1:2015

中文名称：主电池 - 第1部分:总则

英文名称：Primary batteries - Part 1: General

发布日期：2015-07-28

标准范围

IEC 60086-1:20 15作为IEC 60086-1:20 15 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60086-1:20 15（E）旨在就尺寸、命名、端子配置、标记、测试方法、典型性能、安全和环境方面对原电池进行标准化。作为一种主要的电池分类工具，电化学系统也在系统字母、电极、电解质、标称和最大开路电压方面进行了标准化。IEC 60086这一部分的目的是通过确保来自不同制造商的电池可以根据标准形式、配合和功能进行互换，从而使原电池用户、设备设计者和电池制造商受益。此外，为了确保符合上述规定，本部分规定了测试原电池和电池组的标准测试方法。本第十二版取消并取代第十一版（2011年），构成技术修订。与上一版相比的主要技术变化是:-将附件的顺序改为它们在文件中出现的顺序，并增加了一个标题，以表明附件资料在文件中首先出现的位置；-修改表3中非P系统电池的湿度条件；-确定Y和W化学物质的标准放电电压分别为3.5 V和2.8 V；-有关容量测量的详细信息从附件E移至第5.1款。-澄清了硬币/纽扣电池和电池的定义，以便更好地解决吞食硬币电池的问题。关键词:原电池和蓄电池的基本要求和信息

IEC 60086-1:2015 is available as IEC 60086-1:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60086-1:2015(E) is intended to standardize primary batteries with respect to dimensions, nomenclature, terminal configurations, markings, test methods, typical performance, safety and environmental aspects. As a primary battery classification tool, electrochemical systems are also standardized with respect to system letter, electrodes, electrolyte, nominal and maximum open circuit voltage. The object of this part of IEC 60086 is to benefit primary battery users, device designers and battery manufacturers by ensuring that batteries from different manufacturers are interchangeable according to standard form, fit and function. Furthermore, to ensure compliance with the above, this part specifies standard test methods for testing primary cells and batteries. This twelfth edition cancels and replaces the eleventh edition (2011) and constitutes a technical revision. The major technical changes with respect to the previous edition are:
- the order of the Annexes was changed to the order in which they appearin the document and a caption was added to indicate where the Annex information first appears in the document;
- the humidity conditions for non P-system batteries in Table 3 was modified;
- the standard discharge voltage for the Y and W chemistries was determined to be at 3,5 V and 2,8 V respectively;
- details on capacity measurement were moved from Annex E to Subclause 5.1.
- the coin/button cell and battery definition was clarified in order to better address issues with the swallowing of coin cells.Keywords: fundamental requirements and information on primary cells and batteries

标准预览图