IEC 62680-1-8:2019 数据和电源用通用串行总线接口第1-8部分:通用组件USB音频3.0设备类定义终端类型

标准编号：IEC 62680-1-8:2019

中文名称：数据和电源用通用串行总线接口第1-8部分:通用组件USB音频3.0设备类定义终端类型

英文名称：Universal serial bus interfaces for data and power - Part 1-8: Common components – USB Audio 3.0 device class definition terminal types

发布日期：2019-09-19

标准范围

IEC 62680-1-8:20 19将详细描述音频设备类别支持的所有终端类型。本文档被认为是音频设备类别规范的组成部分，尽管本文档的后续修订独立于主要音频设备类别规范的修订演变。这是为了在不妨碍核心音频设备类别规范的情况下容易地适应新终端类型的添加。音频设备类定义适用于复合设备中嵌入的所有设备或功能。音频功能内部的所有音频信号都从输入端子开始，经过一些单元，然后通过输出端子离开该功能。单元可以以各种方式操纵信号。终端代表功能与外部世界的连接。作为终端描述符的一部分，wTerminalType字段指定供应商对终端的建议使用。例如，一对扬声器是比电话线更适合音乐输出的目标。此功能允许供应商确保应用程序以一致且有意义的方式使用设备。

IEC 62680-1-8:2019 is to describe in detail all the Terminal Types that are supported by the Audio Device Class. This document is considered an integral part of the Audio Device Class Specification, although subsequent revisions of this document are independent of the revision evolution of the main Audio Device Class Specification. This is to easily accommodate the addition of new Terminal Types without impeding the core Audio Device Class Specification.
The Audio Device Class Definition applies to all devices or functions embedded in composite devices. All audio signals inside an audio function start at an Input Terminal, pass through some Units, and leave the function through an Output Terminal. Units can manipulate the signal in various ways. Terminals represent the connections of the function to the outside world.
As part of the Terminal descriptor, the wTerminalType field specifies the vendor’s suggested use of the Terminal. For example, a pair of speakers is a more suitable target for music output than a telephone line. This feature allows a vendor to ensure that applications use the device in a consistent and meaningful way.

标准预览图