IEC 61076-2-010:2021 电气和电子设备用连接器.产品要求.第2-010部分:圆形连接器.根据IEC 61076-2-101 IEC 61076-2-109 IEC 61076-2-111和IEC 61076-2-113的匹配接口 具有外部或内部推拉锁定机构的连接器的详细规范

标准编号：IEC 61076-2-010:2021

中文名称：电气和电子设备用连接器.产品要求.第2-010部分:圆形连接器.根据IEC 61076-2-101 IEC 61076-2-109 IEC 61076-2-111和IEC 61076-2-113的匹配接口 具有外部或内部推拉锁定机构的连接器的详细规范

英文名称：Connectors for electrical and electronic equipment - Product requirements - Part 2-010: Circular connectors - Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces according to IEC 61076-2-101, IEC

发布日期：2021-05-27

标准范围

IEC 61076-2-010:2021规定了具有推拉锁定机构的圆形连接器，其尺寸源自M12螺丝锁定连接器，因此与M12螺丝锁定连接器兼容（根据IEC 61076-2-101、IEC 61076-2-109、IEC 61076-2-111或IEC 61076-2-113具有螺丝锁定的自由连接器兼容？根据本文件的推拉固定接口）以及根据IEC 61076-2-101、IEC 61076-2-111（一般编码E和内部推挽的编码F除外）或IEC 61076-2-113的配合接口。根据本文件的具有推拉锁定的固定连接器可与根据任何上述标准的具有M12螺钉锁定的相应编码的自由连接器互配。M12是带有M12螺钉的圆形连接器的螺钉锁定机构的螺纹尺寸-锁定。IEC 61076-2-012定义了用于固定母接头的另一种内推拉，然而，该内推拉与本文件中定义的内推拉不兼容。附录C显示了扩展公自由连接器的不同样式的母自由连接器。本文件涵盖以下两个方面:a)额定电流高达16A和额定电压高达630V的电源连接器，通常用于工业场所的电源和电力应用，以及b)用于频率高达500 MHz的数据和信号传输的连接器。这些连接器包括固定连接器和自由连接器，可重新接线或不可重新接线，具有如上所述的M12推拉锁定。公接头的圆形触点来自？0.6毫米至？1.5毫米。此外，推拉机构由2个不同的推拉机构组成-拉动设计:c)用于凸形和凹形固定连接器的外推拉件，其中锁定槽放置在壳体的外圆柱形表面上。母固定连接器的外部推拉适用于两种不同类型的公连接器。它在外表面上具有用于这两种类型的锁定装置。设计和尺寸见5.3.2和5.3.3。d)用于阴固定连接器和阳自由连接器的内推拉装置，其中锁定装置放置在壳体的内圆柱形表面上。设计和尺寸见5.3.4。本文档中提及的IEC 61076-2系列详细规范提供的不同编码防止了相应编码的公连接器或母连接器与其他标准涵盖的任何其他类似尺寸接口的配合，以及本文档中提及的任何其他IEC 61076-2系列详细规范提供的不同编码之间的交叉配合。

IEC 61076-2-010:2021 specifies circular connectors with a push-pull locking mechanism of a size derived from, and thus being compatible with M12 screw-locking connectors (free connectors with screw-locking according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 or IEC 61076-2-113 are compatible with push？pull fixed interfaces according to this document) and with mating interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 (except codings E in general and coding F for inner push-pull) or IEC 61076-2-113.
A fixed connector with push-pull locking according to this document is intermateable with a correspondingly coded free connector with M12 screw-locking according to any of the above mentioned standards.
M12 is the dimension of the thread of the screw-locking mechanism of circular connectors with M12 screw-locking.
IEC 61076-2-012 defines another inner push-pull for fixed female connectors which is however not compatible to the inner push-pull defined in this document. Annex C shows the different styles of female free connectors to extend male free connectors.
This document covers both:
a) power connectors with current ratings up to 16 A and voltage ratings up to 630 V, typically used for power supply and power applications in industrial premises, and
b) connectors for data and signal transmission with frequencies up to 500 MHz.
These connectors consist of both, fixed and free connectors, either rewirable or non-rewirable, with M12 push-pull locking as explained above. Male connectors have round contacts from？0,6 mm up to？1,5 mm. In addition, the push-pull mechanisms consist of 2 different push-pull designs:
c) An outer push-pull for male and female fixed connector, where the locking groove is placed onto the outer cylindric surface of the housing. The outer push-pull for female fixed connectors is made for 2 different types of male connectors. It has locking means for both types on its outer surface.
For design and dimensions see 5.3.2 and 5.3.3.
d) An inner push-pull for female fixed connectors and for male free connectors, where the locking means are placed onto the inner cylindric surface of the housing.
For design and dimensions see 5.3.4.
The different codings provided by IEC 61076-2 series detail specifications mentioned within this document prevent the mating of accordingly coded male or female connectors to any other similarly sized interfaces, covered by other standards and the cross-mating between the different codings provided by any other IEC 61076-2 series detail specification mentioned within this document.

标准预览图