IEC 61340-5-1:2016 静电 - 第5-1部分:从静电现象中保护电子设备 - 一般要求

标准编号：IEC 61340-5-1:2016

中文名称：静电 - 第5-1部分:从静电现象中保护电子设备 - 一般要求

英文名称：Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements

发布日期：2016-05-27

标准范围

IEC 61340-5-1:20 16可作为IEC 61340-5-1:20 16获得包含国际标准及其红线的RLV版本，显示技术内容与上一版。IEC 61340-5-1:20 16适用于以下活动:制造、加工、组装、安装、包装、贴标签、维修、测试、检查、运输或以其他方式处理绝缘导体耐压大于或等于100 V HBM、200 V CDM和35 V的电气或电子零件、组件和设备。耐压较低的ESD可能需要额外的控制元件或调整限值。设计用于处理ESD耐压较低的物品的工艺仍可声称符合本标准。本标准规定了ESD控制程序的要求。IEC TR 61340-5-2[9]为本标准的实施提供了指导。本标准不适用于电起爆装置、易燃液体、气体和粉末。本标准的目的是提供建立、实施和维护ESD控制程序（以下简称“程序”）的管理和技术要求。与上一版相比，此版本包括以下重大技术变更:a)更改了技术要求，使IEC 61340-5-1与其他行业ESD标准保持一致；b)更新了参考文件以反映新发布的IEC标准；c)增加了关于产品鉴定的章节；d)删除表4，详细包装要求推迟至IEC 61340-5-3；e)条款A.1被删除，现在包含在IEC 61340-4-6中。

IEC 61340-5-1:2016 is available as IEC 61340-5-1:2016RLV which contains the International Standard and its Redlineversion, showing all changes of the technical content compared tothe previous edition.

IEC 61340-5-1:2016 applies to activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V HBM, 200 V CDM and 35 V for isolated conductors. ESDS with lower withstand voltages may require additional control elements or adjusted limits. Processes designed to handle items that have lower ESD withstand voltage(s) can still claim compliance to this standard. This standard provides the requirements for an ESD control program. IEC TR 61340-5-2 [9] provides guidance on the implementation of this standard. This standard does not apply to electrically initiated explosive devices, flammable liquids, gases and powders. The purpose of this standard is to provide the administrative and technical requirements for establishing, implementing and maintaining an ESD control program (hereinafter referred to as the "program"). This edition includes the following significant technical changes with respect to the previous edition:
a) Technical requirements were changed to align IEC 61340-5-1 with other industry ESD standards;
b) Reference documents were updated to reflect newly released IEC standards;
c) A section on product qualification was added;
d) Table 4 was deleted and detailed packaging requirements were deferred to IEC 61340-5-3;
e) Clause A.1 was removed and is now included in IEC 61340-4-6.

标准预览图