IEC 61300-1:2016 光纤互连器件和无源元件基本试验和测量程序第1部分:总则和指南

标准编号：IEC 61300-1:2016

中文名称：光纤互连器件和无源元件基本试验和测量程序第1部分:总则和指南

英文名称：Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance

发布日期：2016-07-28

标准范围

IEC 61300-1:2016为互连设备和无源元件的IEC 61300-2和IEC 61300-3系列中定义的基本测试和测量程序提供了一般信息和指南。本标准应与相关规范结合使用，相关规范将定义要使用的试验、每项试验所需的严重程度、顺序（如相关）以及允许的性能极限。如果本基本标准与相关规范之间存在冲突，则以相关规范为准。第四版取消并取代2011年出版的第三版。本版为技术修订版。与上一版相比，本版包括以下重大技术变更:重新考虑术语和定义；增加第4条。关键词:互连装置和无源元件的试验和测量程序

IEC 61300-1:2016 provides general information and guidance for the basic test and measurement procedures defined in the IEC 61300-2 and IEC 61300-3 series for interconnecting devices and passive components. This standard should be used in combination with the relevant specification which will define the tests to be used, the required degree of severity for each of them, their sequence, if relevant, and the permissible performance limits. In the event of conflict between this basic standard and the relevant specification, the latter will take precedence. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: reconsideration of the terms and definitions; addition of Clause 4.Keywords: test and measurement procedures for interconnecting devices and passive components

标准预览图