IEC 61980-3:2022 电动车辆无线电力传输（WPT）系统.第3部分:磁场无线电力传输系统的特殊要求

标准编号：IEC 61980-3:2022

中文名称：电动车辆无线电力传输（WPT）系统.第3部分:磁场无线电力传输系统的特殊要求

英文名称：Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for magnetic field wireless power transfer systems

发布日期：2022-11-23

标准范围

IEC 61980-3:20 22适用于通过磁场（MF-WPT）向电动道路车辆无线传输电力的非车载供电设备，用于向RESS（可充电储能系统）和/或其他车载电气系统提供电能。MF-WPT系统在符合IEC 60038的标准额定电源电压下运行，最高可达1 000 V交流电，最高可达1 500 V直流电。电力传输在电动车辆(EV)静止时发生。满足本文件要求的非车载供电设备旨在与满足ISO 19363中描述的要求的EV设备一起运行。本文件涉及的方面包括-特性和操作条件，-所需的电气安全水平，-如果MF WPT系统要求，安全和工艺事项的基本沟通要求，-确保高效和安全的MF-WPT功率传输的定位要求，以及-MF-WPT系统的特定EMC要求。今后的文件正在考虑以下几个方面:-两轮和三轮车辆MF-WPT系统的要求，-对向行驶中的电动汽车供电的MF-WPT系统的要求，-双向功率传输的要求，-嵌入式主设备的要求，-重型车辆MF-WPT系统的要求，以及-输入大于11.1 kVA的MF-WPT系统的要求。本文件不适用于-与维护有关的安全方面，以及-无轨电车、轨道车辆和主要为越野使用而设计的车辆。IEC 61980-3:20 22应与IEC 61980-1:20 20结合使用。

IEC 61980-3:2022 applies to the off-board supply equipment for wireless power transfer via magnetic field (MF-WPT) to electric road vehicles for purposes of supplying electric energy to the RESS (rechargeable energy storage system) and/or other on-board electrical systems. The MF-WPT system operates at standard supply voltage ratings per IEC 60038 up to 1 000 V AC and up to 1 500 V DC from the supply network. The power transfer takes place while the electric vehicle (EV) is stationary.
Off-board supply equipment fulfilling the requirements in this document are intended to operate with EV devices fulfilling the requirements described in ISO 19363.
The aspects covered in this document include
– the characteristics and operating conditions,
– the required level of electrical safety,
– requirements for basic communication for safety and process matters if required by a MF WPT system,
– requirements for positioning to assure efficient and safe MF-WPT power transfer, and
– specific EMC requirements for MF-WPT systems.
The following aspects are under consideration for future documents:
– requirements for MF-WPT systems for two- and three-wheel vehicles,
– requirements for MF-WPT systems supplying power to EVs in motion,
– requirements for bidirectional power transfer,
– requirements for flush mounted primary device,
– requirements for MF-WPT systems for heavy duty vehicle, and
– requirements for MF-WPT systems with inputs greater than 11,1 kVA.
This document does not apply to
– safety aspects related to maintenance, and
– trolley buses, rail vehicles and vehicles designed primarily for use off-road.
IEC 61980-3:2022 is to be used in conjunction with IEC 61980-1:2020.

标准预览图