IEC 61753-111-09:2021 纤维光学互连器件和无源元件.性能标准.第111-09部分:密封密封件.S类.地下
标准编号：IEC 61753-111-09:2021
中文名称：纤维光学互连器件和无源元件.性能标准.第111-09部分:密封密封件.S类.地下
英文名称：Fibre optic interconnecting devices and passive components - Performance standard - Part 111-09: Sealed closures - Category S - Subterranean
发布日期：2021-09-14
标准范围
IEC 61753-111-09:20 21包含密封光纤封闭件需要满足的最低测试、测试严重性和测量要求，以便被归类为符合IEC 61753表A.15中定义的S类地下标准？1:2018.第一版取消并取代了2009年发布的IEC 61753-111-9。本版构成技术修订版。本版本包括以下与IEC 61753相关的重大技术变更？111？9:根据IEC 61753-1:20 18和IEC 61756-1:20 19更新术语和定义；增加了材料抗紫外线和抗真菌测试的详细测试严重性；根据IEC 61753-1:20 18更新测试严重性；除非另有规定，实验室测试条件符合IEC 61300-1至+23°C±5°C；根据IEC 61756-1:20 19，添加具有储存纤维最小弯曲半径的B-657纤维类型；振动密封试验改为10 Hz，振幅3 mm，循环次数1 000 000次；减少小直径电缆和管道的电缆保持试验中增加的载荷；减少小直径电缆和管道的电缆轴向压缩试验的载荷；增加了扭转和弯曲试验的循环持续时间；删除了自由落体测试（现在包含在光学冲击测试中）；组装和拆卸测试持续时间减少到5个周期对溶剂和污染流体的耐受性:将在柴油中的浸泡时间改为1小时和24小时干燥时间，并取消了在煤油中的浸泡；温度变化的持续时间减少到12个循环。
IEC 61753-111-09:2021 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category S – Subterannean, as defined in Table A.15 of IEC 61753？1:2018. This first edition cancels and replaces IEC 61753-111-9 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753？111？9:
- terms and definitions updated according to IEC 61753-1:2018 and IEC 61756-1:2019;
- detailed test severities added for UV light and fungus resistance tests of materials;
- test severities updated according to IEC 61753-1:2018;
- laboratory test conditions harmonized with IEC 61300-1 to +23 °C ± 5 °C, unless otherwise specified;
- addition of B-657 fibre types with minimum bending radius of stored fibres according to IEC 61756-1:2019;
- vibration sealing test changed to 10 Hz, 3 mm amplitude and 1 000 000 cycles;
- reduced loads added in cable retention test for small diameter cables and tubes;
- reduced loads for cable axial compression test for small diameter cables and tubes;
- duration of the cycles in torsion and bending test added;
- free fall test removed (is covered now by the optical shock test);
- assembly and disassembly test duration reduced to 5 cycles
- resistance to solvents and contaminating fluids: changed duration of immersion in diesel to 1 h and 24 h drying time and removed immersion in kerosene;
- duration of the change of temperature reduced to 12 cycles.
标准预览图
