IEC 61993-2:2018 海上导航和无线电通信设备与系统 - 自动识别系统（Ais） - 第2部分:自动识别系统的A类船载设备（Ais） - 操作和性能要求 测试方法和所需测试结果

标准编号：IEC 61993-2:2018

中文名称：海上导航和无线电通信设备与系统 - 自动识别系统（Ais） - 第2部分:自动识别系统的A类船载设备（Ais） - 操作和性能要求 测试方法和所需测试结果

英文名称：Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and re

发布日期：2018-07-19

标准范围

新的！IEC 61993-2:20 18作为IEC 61993-2:20 18 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 61993-2:20 18规定了符合IMO在MSC.74(69):1998号决议附件3中采用的性能标准的最低操作和性能要求、测试方法和所需测试结果。本文件纳入了ITU-R M.1371建议中包含的A类船载设备的适用技术特性，并在适用的情况下考虑了ITU无线电法规。此外，它还考虑了与IEC 60945相关的IMO决议A.694(17)。当本文件中的要求与IEC 60945不同时，以本文件的要求为准。本文件还规定了输入和显示数据的装置以及与适合用作输入和显示数据装置的其他设备的接口的最低要求。这第三版取消并取代了2012年出版的第二版。本版构成技术修订版。与上一版相比，此版本包括以下技术变更:a)它结合了ITU R M.1371-5:20 14建议中包含的技术特征；b)它引入了定位设备组的概念，以便除了AIS SART之外还包括EPIRB AIS和MOB AIS；c)它通过引入新的句子SSA来增加配置输入的安全特征；d)它增加了IEC 61162-450/460接口的可选实现；e)增加了桥梁警报管理（BAM）的要求；f)它引入了拖船使用的扩展尺寸值；g)它增加了软件更新要求。

NEW!IEC 61993-2:2018 is available as IEC 61993-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.


IEC 61993-2:2018 specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards adopted by IMO in Resolution MSC.74(69):1998, Annex 3. This document incorporates the applicable technical characteristics of Class A shipborne equipment included in Recommendation ITU-R M.1371 and takes into account the ITU Radio Regulations, where applicable. In addition, it takes account of IMO Resolution A.694(17) to which IEC 60945 is associated. When a requirement in this document is different from IEC 60945, the requirement of this document takes precedence. This document also specifies the minimum requirements both for the means to input and display data and for the interfaces to other equipment suitable to be used as means of input and display data. This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition:
a) it incorporates the technical characteristics included in Recommendation ITU R M.1371-5:2014;
b) it introduces the concept of locating device groups in order to include EPIRB AIS and MOB AIS in addition to AIS SART;
c) it adds security features for configuration input by introducing a new sentence SSA;
d) it adds optional implementation of IEC 61162-450/460 interfaces;
e) it adds requirements for bridge alert management (BAM);
f) it introduces extended dimension values used by towing vessels;
g) it adds a software update requirement.

标准预览图