IEC 60317-0-6:2020 绕组线的规格 - 第0-6部分:一般要求 - 玻璃纤维缠绕树脂或清漆浸渍 裸露或漆包铜线

标准编号：IEC 60317-0-6:2020

中文名称：绕组线的规格 - 第0-6部分:一般要求 - 玻璃纤维缠绕树脂或清漆浸渍 裸露或漆包铜线

英文名称：Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire

发布日期：2020-06-09

标准范围

IEC 60317-0-6:20 20作为IEC 60317-0-6:20 20 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60317-0-6:20 20规定了玻璃纤维缠绕树脂或清漆浸渍、裸或漆包圆铜绕组线的一般要求。标称导体直径的范围在相关规格表中给出。这第二版取消并取代了2001年出版的第一版和修正案1:20 06。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-修订至3.3，外观；-对表1的修订，标称导体直径为1,600 mm的单玻璃纤维覆盖层上1级导线的最大总直径-5,000毫米；-修订表2，标称导体直径为1,600 mm-5,000 mm的双层玻璃纤维覆盖层上1级导线的最大总直径；表3中对伸长率测量的说明为“最小伸长率%”。

IEC 60317-0-6:2020 is available as IEC 60317-0-6:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60317-0-6:2020 specifies the general requirements of glass-fibre wound resin or varnish impregnated, bare or enamelled, round copper winding wires. The range of nominal conductor diameters is given in the relevant specification sheet. This second edition cancels and replaces the first edition published in 2001 and Amendment 1:2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- revision to 3.3, Appearance;
- revision to Table 1, maximum overall diameter of grade 1 wire over single-glass fibre covering for nominal conductor diameters 1,600 mm - 5,000 mm;
- revision to Table 2, maximum overall diameter of grade 1 wire over double-glass fibre covering for nominal conductor diameters 1,600 mm - 5,000 mm;
clarification in Table 3 measurement of elongation as “minimum elongation %”.

标准预览图