IEC TS 61980-3:2019 电动汽车无线功率传输（WPT）系统第3部分:磁场无线功率传输系统的特殊要求

标准编号：IEC TS 61980-3:2019

中文名称：电动汽车无线功率传输（WPT）系统第3部分:磁场无线功率传输系统的特殊要求

英文名称：Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems

发布日期：2019-06-13

标准范围

IEC TS 61980-3:20 19适用于用于将电力从供电网络传输到电动道路车辆的磁场无线电力传输（MF-WPT）的设备，以向RESS（可充电能量存储系统）和/或其他车载电气系统提供电能。根据IEC 60038，MF-WPT系统在高达1 000 V交流电和高达1 500 V DC的标准额定电源电压下运行。电力传输发生在电动汽车（EV）静止时。本文件也适用于现场存储系统（如缓冲电池）提供的MF-WPT设备，其标准电源电压额定值符合IEC 60038，最高可达1 000 V AC和1 500 V DC。本文件涉及的方面包括-特性和操作条件，-所需的电气安全水平，-如果MF-WPT系统要求，安全和工艺事项的基本沟通要求，-确保高效和安全的MF-WPT功率传输的定位要求，以及-MF-WPT系统的特定EMC要求。今后的文件正在考虑以下几个方面:-对两轮和三轮车辆的要求，-向行驶中的电动汽车供电的MF-WPT系统的要求，以及-双向功率传输的要求。本标准不适用于-与维护有关的安全方面，以及-无轨电车、轨道车辆和主要为越野使用而设计的车辆。

IEC TS 61980-3:2019 applies to the equipment for the magnetic field wireless power transfer (MF-WPT) of electric power from the supply network to electric road vehicles for purposes of supplying electric energy to the RESS (rechargeable energy storage system) and/or other on-board electrical systems. The MF-WPT system operates at standard supply voltages ratings per IEC 60038 up to 1 000 V AC and up to 1 500 V DC The power transfer takes place while the electric vehicle (EV) is stationary.
This document also applies to MF-WPT equipment supplied from on-site storage systems (e.g. buffer batteries) at standard supply voltages ratings per IEC 60038 up to 1 000 V AC and up to 1 500 V DC.
The aspects covered in this document include
– the characteristics and operating conditions,
– the required level of electrical safety,
– requirements for basic communication for safety and process matters if required by a MF-WPT system,
– requirements for positioning to assure efficient and safe MF-WPT power transfer, and
– specific EMC requirements for MF-WPT systems.
The following aspects are under consideration for future documents:
– requirements for two- and three-wheel vehicles,
– requirements for MF-WPT systems supplying power to EVs in motion, and
– requirements for bidirectional power transfer.
This standard does not apply to
– safety aspects related to maintenance, and
– trolley buses, rail vehicles and vehicles designed primarily for use off-road.

标准预览图