IEC 61300-2-37:2016 光纤互连设备和无源元件 - 基本测试和测量程序 - 第2-37部分:测试 - 光纤闭合的电缆弯曲

标准编号：IEC 61300-2-37:2016

中文名称：光纤互连设备和无源元件 - 基本测试和测量程序 - 第2-37部分:测试 - 光纤闭合的电缆弯曲

英文名称：Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures

发布日期：2016-04-20

标准范围

IEC 61300-2-37:2016描述了当进入或离开光纤封闭件的电缆经受弯曲时光纤封闭件的密封和夹紧硬件的有效性的测试。这第三版取消并取代了2006年出版的第二版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:-对第4.1、6.5、6.7款和图1进行实质性更新；-根据IEC 61753-1，增加了由电缆弯曲的数量和方向、每个环境类别的测试温度和超压确定的严重性。关键词:光纤封闭件的密封和夹紧硬件，电缆弯曲

IEC 61300-2-37:2016 describes a test for the effectiveness of the sealing and clamping hardware of a fibre optic closure when the cable entering or exiting the fibre optic closure is subjected to bending. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- substantial updating of Subclauses 4.1, 6.5, 6.7 and Figure 1;
- addition of severities which are determined by the number and direction of cable bends, test temperature and overpressure for each environmental category according to IEC 61753-1.Keywords: sealing and clamping hardware of a fibre optic closure, cable bending

标准预览图