IEC 61010-2-034:2017 测量 控制和实验室用电气设备的安全要求 - 第2-034部分:绝缘电阻测量设备和电气强度试验设备的特殊要求

标准编号：IEC 61010-2-034:2017

中文名称：测量 控制和实验室用电气设备的安全要求 - 第2-034部分:绝缘电阻测量设备和电气强度试验设备的特殊要求

英文名称：Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength

发布日期：2017-01-10

标准范围

IEC 61010-2-034:2017本团体安全出版物主要用作范围中提及的产品的产品安全标准，但技术委员会也应根据IEC指南104和lSO/lEC指南51中规定的原则，在编写与本标准范围中提及的产品相似的产品的出版物时使用。IEC 61010-2-034:2017规定了输出电压超过50 V交流电的绝缘电阻测量设备和电气强度测试设备的安全要求。或120V直流。本文件也适用于具有绝缘电阻测量功能或电强度试验测量功能的组合测量设备。根据IEC指南104，它具有水平标准的地位。本出版物应与IEC 61010-1:20 10一起阅读。

IEC 61010-2-034:2017 This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
IEC 61010-2-034:2017 specifies safety requirements for measurement equipment for insulation resistance and test equipment for electric strength with an output voltage exceeding 50 V a.c. or 120 V d.c.
This document also applies to combined measuring equipment which has an insulation resistance measurement function or an electric strength test measurement function. It has the status of a horizontal standard in accordance with IEC Guide 104. This publication is to be read in conjunction with IEC 61010-1:2010.

标准预览图