IEC 62282-3-202:2025 燃料电池技术 第3-202部分:固定式燃料电池动力系统 多单元运行小型燃料电池动力系统的性能试验方法

标准编号：IEC 62282-3-202:2025

中文名称：燃料电池技术 第3-202部分:固定式燃料电池动力系统 多单元运行小型燃料电池动力系统的性能试验方法

英文名称：Fuel cell technologies - Part 3-202: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems for multiple units operation

发布日期：2025-03-27

标准范围

IEC 62282-3-202:2025提供了专门针对能量管理系统的热和电特性的性能测试方法，以有效地共享联网的小型固定式燃料电池电源系统的热和功率。这些测试方法适用于每个小型固定式燃料电池动力系统。本文件涵盖了小型固定式燃料电池动力系统，其可以由辅助热发生器或热存储系统或两者来补充，例如:-输出:每个系统的额定电力输出小于10千瓦；-输出方式:并网或独立运行或单机运行，交流（AC）输出不超过240V或直流（DC）输出；-工作压力:燃料和氧化剂通道的最大允许工作压力小于0.1 MPa(G)；-燃料:气体燃料(天然气、液化石油气、丙烷、丁烷、氢气)或液体燃料(煤油、甲醇)；氧化剂:空气。本文件不适用于除用于安全、监测和控制的（小规模）备用电源之外的电力存储的小型固定式燃料电池电力系统。

IEC 62282-3-202:2025 provides performance test methods specialized for the thermal and electrical characteristics of an energy management system to effectively share the heat and power of networked small stationary fuel cell power systems. These test methods are applied for each small stationary fuel cell power system. This document covers small stationary fuel cell power systems which can be complemented with a supplementary heat generator or a thermal storage system, or both, such as:
- output: rated electric power output of less than 10 kW for each system;
- output mode: grid-connected or independent operation or stand-alone operation with alternating current (AC) output not exceeding 240 V or direct current (DC) output;
- operating pressure: maximum allowable working pressure of less than 0,1 MPa (G) for the fuel and oxidant passages;
- fuel: gaseous fuel (natural gas, liquefied petroleum gas, propane, butane, hydrogen) or liquid fuel (kerosene, methanol); oxidant: air.
This document does not apply to small stationary fuel cell power systems with electricity storage other than (small scale) back-up power for safety, monitoring and control.

标准预览图