IEC 61290-1-3:2015 光放大器 - 测试方法 - 第1-3部分:功率和增益参数 - 光功率计方法
标准编号:IEC 61290-1-3:2015
中文名称:光放大器 - 测试方法 - 第1-3部分:功率和增益参数 - 光功率计方法
英文名称:Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
发布日期:2015-02-24
标准范围
IEC 61290-1-3:20 15适用于所有市售光放大器(OA)和光放大子系统。它适用于使用光泵浦光纤(基于稀土掺杂光纤或拉曼效应的OFA)、半导体(SOA)和波导(POWA)的OA。IEC 61290-1这一部分的目的是建立统一的要求,通过光功率计测试方法准确可靠地测量IEC 61291-1中定义的下列OA参数:-标称输出信号功率;-增益;-偏振相关增益;-最大输出信号功率;-最大总输出功率。后跟(‡)的所有数值都是建议值,其测量是有保证的。其他值可能是可接受的,但应进行验证。IEC 61290的这一部分-1适用于单通道放大器。对于多通道放大器,IEC 61290-10系列适用。这第三版取消并取代了2005年出版的第二版。本版构成技术修订版。与上一版相比,此版本包括以下重大技术变更:-大多数参数的详细描述已在IEC 61290-1中描述,并从本部分中删除;-增加了最大输出信号功率和最大总输出功率的描述。关键词:光放大器(OA)单通道放大器光功率计测试方法
IEC 61290-1-3:2015 applies to all commercially available optical amplifiers (OA) and optically amplified subsystems. It applies to OA using optically pumped fibres (OFA based on either rare-earth doped fibres or on the Raman effect), semiconductors (SOA), and waveguides (POWA). The object of this part of IEC 61290-1 is to establish uniform requirements for accurate and reliable measurements, by means of the optical power meter test method, of the following OA parameters, as defined in IEC 61291-1:
- nominal output signal power;
- gain;
- polarization-dependent gain;
- maximum output signal power;
- maximum total output power. All numerical values followed by (‡) are suggested values for which the measurement is assured. Other values may be acceptable but should be verified. This part of IEC 61290-1 applies to single-channel amplifiers. For multichannel amplifiers, the IEC 61290-10 series applies. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Detail description of most parameters has been described in IEC 61290-1 and removed from this part;
- Description of maximum output signal power and maximum total output power are added.Keywords: optical amplifiers (OA), single-channel amplifiers, optical power meter test method
标准预览图


