IEC 61076-2-114:2020 电气和电子设备用连接器.产品要求.第2-114部分:圆形连接器.带M8螺钉的连接器的详细规范.高达100MHz的数据传输用带电源触点和信号触点的锁定

标准编号：IEC 61076-2-114:2020

中文名称：电气和电子设备用连接器.产品要求.第2-114部分:圆形连接器.带M8螺钉的连接器的详细规范.高达100MHz的数据传输用带电源触点和信号触点的锁定

英文名称：Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for connectors with M8 screw- locking with power contacts and signal contacts for data transmission up to 100 MHz

发布日期：2020-09-24

标准范围

IEC 61076-2-114:2020描述了具有M8螺钉锁定的圆形连接器，通常用于工业应用中的数据和电力传输。这些连接器由可重新接线或不可重新接线的固定和自由连接器组成。数据传输性能适用于高达100 MHz的类别5。提供了识别为D编码和P编码的两种编码版本，它们的引脚尺寸和可选的极数不同，因此不同于为现场应用提供的功能。公接头有圆形触点？D编码为0.8 mm，以及？P编码连接器为1 mm。本文件提供的编码防止相应编码的公连接器或母连接器与其他标准所涵盖的任何其他类似尺寸的接口配合。

IEC 61076-2-114:2020 describes circular connectors with M8 screw locking typically used for data and power transmissions in industrial applications. These connectors consist of fixed and free connectors that are either rewireable or non-rewireable. Data transmission performance is for Category 5 up to 100 MHz.
Two coded versions, identified as D-coded and P-coded, are provided that differ by their pin size and optionally by number of poles, hence by the function provided for field applications.
Male connectors have round contacts？0,8 mm for D-coded, and？1 mm for P-coded connectors.
The coding provided by this document prevents the mating of accordingly coded male or female connectors to any other similarly sized interfaces covered by other standards.

标准预览图