IEC 60684-3-116:2024 柔性绝缘套管 - 第3部分:各种套管的规范 - 第116和117页:挤压聚氯丁烯 通用

标准编号：IEC 60684-3-116:2024

中文名称：柔性绝缘套管 - 第3部分:各种套管的规范 - 第116和117页:挤压聚氯丁烯 通用

英文名称：Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose

发布日期：2024-03-27

标准范围

IEC 60684-3-116:2024作为IEC 60684-3-116:2024 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60684-3-116:2024给出了由基于聚氯丁二烯弹性体的化合物挤出的非热收缩套管的要求。已经发现这种套管适用于高达95℃的温度。这种类型的套管通常内径可达25毫米，并有以下不透明颜色:黑色、棕色、红色、橙色、黄色、绿色、蓝色、紫色、灰色、白色和粉色。除本文档中明确列出的尺寸或颜色之外，其他尺寸或颜色也可能作为定制产品提供。如果这些项目符合表2中列出的其他属性要求，则视为符合本文件。符合本规范的材料符合既定的性能水平。然而，用户对特定应用的材料的选择将基于应用中足够性能所必需的实际要求，而不是仅基于规范。第四版取消并取代了2010年出版的第三版，构成了技术修订。与上一版相比，此版本包括以下重大技术变更:a)更新表2中的条款参考；b)增加对流体的阻力测试。

IEC 60684-3-116:2024 is available as IEC 60684-3-116:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60684-3-116:2024 gives the requirements for non-heat-shrinkable sleeving, extruded from compounds based on polychloroprene elastomer. This sleeving has been found suitable for temperatures up to 95 °C. Sleeving of this type is normally available with internal diameters up to 25 mm, and in the following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white and pink. Sizes or colours other than those specifically listed in this document can possibly be available as custom items. These items are considered to comply with this document if they comply with the other property requirements listed in Table 2. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in the application and not based on the specification alone. This fourth edition cancels and replaces the third edition published in 2010 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) update of clause references in Table 2;
b) addition of resistance to fluids test.

标准预览图