IEC 63218:2021 含碱性或其他非酸性电解质的二次电池和电池组.便携式二次锂、镍镉和镍金属氢化物电池和电池组.环境方面指南

标准编号：IEC 63218:2021

中文名称：含碱性或其他非酸性电解质的二次电池和电池组.便携式二次锂、镍镉和镍金属氢化物电池和电池组.环境方面指南

英文名称：Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications - Guidance on environmental aspects

发布日期：2021-08-30

标准范围

IEC 63218:2021提供了关于便携式应用的二次锂、镍镉和镍氢电池和电池组（以下简称“相关二次电池和电池组”）的环境方面的要求和建议。在IEC 61960-3、IEC 61960-4、IEC 61951-1和IEC 61951-2的范围内规定了相关的二次电池和电池组。注:IEC 61960-3将便携式应用定义为包括手持设备、可运输设备和可移动设备。有关示例，请参见IEC 61960-3。本文件不适用于最终用途产品中嵌入的电池。一旦嵌入式电池从最终用途产品中移除，本文件将适用于该产品。与相关二次电池相关的安全和控制电路以及外壳，除了构成最终使用产品的一部分的那些之外，作为相关二次电池的一部分被涵盖在本文件中。

IEC 63218:2021 provides requirements and recommendations on environmental aspects of secondary lithium, nickel cadmium and nickel-metal hydride cells and batteries for portable applications (hereafter referred to as “relevant secondary cells and batteries”).
Relevant secondary cells and batteries are specified within the scopes of IEC 61960-3, IEC 61960-4, IEC 61951-1, and IEC 61951-2.
NOTE Portable applications are defined in IEC 61960-3 as comprising hand-held equipment, transportable equipment, and movable equipment. See IEC 61960-3 for examples.
This document is not intended to be applied to batteries embedded in end-use products. Once the embedded battery is removed from an end-use product, this document becomes applicable to it.
The safety and control circuits as well as cases associated with relevant secondary batteries, except for those forming part of an end-use product, are covered by this document as parts of the relevant secondary batteries.

标准预览图