IEC 62841-4-3:2020 电动手持式工具 可移动工具和草坪及园林机械.安全性.第4-3部分:行人控制的手持式割草机的特殊要求

标准编号：IEC 62841-4-3:2020

中文名称：电动手持式工具 可移动工具和草坪及园林机械.安全性.第4-3部分:行人控制的手持式割草机的特殊要求

英文名称：Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers

发布日期：2020-11-11

标准范围

IEC 62841-4-3:20 20本文件适用于行人控制的手扶式设计-圆筒式割草机；和-旋转式割草机配备有-金属切割装置；和/或-刚性非金属切割装置；和/或-非金属切割装置，其具有枢转地安装在大致圆形的驱动单元上的一个或多个切割元件，其中这些切割元件依靠离心力来实现切割，并且对于每个单个切割元件具有大于10J的动能。本文件不适用于-机器人割草机；-遥控割草机；-连枷式割草机或连枷式附件；-剪刀型割草机；-割草机；-镰刀杆割草机；-牵引式/半安装式割草机；-擦洗机；-草坪修剪器和草坪边缘修剪器；-草坪修边机；-割草机；-割灌机；-刷锯；-农用割草机；-后排座椅/闷热单元；-乘坐式机器；-无动力割草机；-内燃机驱动的割草机；-混合动力和燃料电池动力的机器以及相关的充电系统；和-园林拖拉机或其附件。机器人割草机由IEC 60335-2-107涵盖，并将由IEC 62841的未来部分涵盖。

IEC 62841-4-3:2020 This document applies to the design of pedestrian controlled walk-behind
- cylinder lawnmowers;
and
- rotary lawnmowers
equipped with
- metallic cutting means; and/or
- rigid non-metallic cutting means; and/or
- non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of greater than 10 J.
This document does not apply to
- robotic lawnmowers;
- remote-controlled lawnmowers;
- flail mowers or flail-type attachments;
- scissors type lawnmowers;
- grassland mowers;
- sickle bar mowers;
- towed/semi-mounted grass-cutting machines;
- scrub-clearing machines;
- lawn trimmers and lawn edge trimmers;
- lawn edgers;
- grass trimmers;
- brush cutters;
- brush saws;
- agricultural mowers;
- trailing seat/sulky units;
- ride-on machines;
- non-powered lawnmowers;
- combustion engine powered lawnmowers;
- hybrid and fuel cell powered machines and associated charging systems; and
- garden tractors or their attachments.
Robotic lawnmowers are covered by IEC 60335-2-107, and will be covered by a future part of IEC 62841.

标准预览图