IEC 60335-1:2010 家用和类似电器 - 安全 - 第1部分:一般要求

标准编号：IEC 60335-1:2010

中文名称：家用和类似电器 - 安全 - 第1部分:一般要求

英文名称：Household and similar electrical appliances - Safety - Part 1: General requirements

发布日期：2010-05-12

标准范围

IEC 60335-1:20 10涉及家用和类似用途电器的安全，单相电器的额定电压不超过250 V，其他电器的额定电压不超过480 V。电池供电的电器和其他直流。所提供的设备在本标准的范围内。不用于正常家庭使用但可能对公众造成危险的电器，如用于商店、轻工业和农场的非专业人员使用的电器，属于本标准的范围。这种器具的实例是餐饮设备、商业用途的清洁器具和理发师用器具。本版与第四版相比，主要变化如下:-更新了标准文本，使其与已注明日期的规范性参考文献的最新版本保持一致；-使用可编程电子电路修改功能安全要求，包括软件验证要求；-更新条款29以涵盖如在开关模式电源电路中经受高频电压的绝缘要求；-更新子条款30.2，以进一步将预选选项与最终产品测试选项对齐；-删除了一些注释，并将许多其他注释转换为规范性文本；-明确了III类建筑的要求。请国家委员会注意，设备制造商和测试组织在新的、修订的或修订的IEC出版物出版后可能需要一个过渡期，以便根据新的要求制造产品，并为进行新的或修订的测试做好准备。委员会建议，该出版物的内容应在出版之日起12个月或36个月内通过，以便在全国范围内实施。2010年7月和2011年4月更正的内容已纳入本副本。

IEC 60335-1:2010 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. Examples of such appliances are catering equipment, cleaning appliances for commercial use, and appliances for hairdressers. The principal changes in this edition as compared with the fourth edition are as follows:
- updated the text of the standard to align with the most recent editions of the dated normative references;
- modified the functional safety requirements using programmable electronic circuits including software validation requirements;
- updated Clause 29 to cover insulation requirements subjected to high frequency voltages as in switch mode power supply circuits;
- updated Subclause 30.2 to further align the pre-selection option with the end-product test option;
- deleted some notes and converted many other notes to normative text;
- clarified requirements for class III constructions.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication.The contents of the corrigenda of July 2010 and April 2011 have been included in this copy.

标准预览图