IEC 61076-3-106:2023 电气和电子设备用连接器.产品要求.第3-106部分:矩形连接器.与IEC 60603-7系列接口的工业环境用8路屏蔽和非屏蔽连接器一起使用的保护外壳的详细规范

标准编号：IEC 61076-3-106:2023

中文名称：电气和电子设备用连接器.产品要求.第3-106部分:矩形连接器.与IEC 60603-7系列接口的工业环境用8路屏蔽和非屏蔽连接器一起使用的保护外壳的详细规范

英文名称：Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating t

发布日期：2023-07-19

标准范围

IEC 61076-3-106:2023构成了用于频率高达600 MHz数据传输的8路连接器的详细产品规范。它涵盖了保护外壳，用于将利用IEC 60603-7系列中描述的接口的现有8路屏蔽和非屏蔽连接器升级到符合IEC 60529的IP65/IP67等级，用于工业环境。根据本文件，外壳覆盖了各种不同的锁定机构以及IEC 60603-7系列中详述的各种不同的安装配置和终端类型。IEC 60603-7中定义了所有变型的通用配合配置。第3条规定的外壳配合尺寸允许满足IEC 60603-7规定的配合条件。本文件中描述的完全组装的变体（连接器）包含完全符合IEC 60603-7系列固定和自由连接器。

IEC 61076-3-106:2023 constitutes a detail product specification for 8-way connectors for data transmission with frequencies up to 600 MHz.
It covers protective housings for upgrading existing 8-way shielded and unshielded connectors utilizing the interface described in the IEC 60603-7 series to IP65/IP67 rating according to IEC 60529, for use in industrial environments.
The housings cover a variety of different locking mechanisms according to this document and a variety of different mounting configurations and termination types which are detailed in the IEC 60603-7 series.
Common mating configurations for all variants are defined in IEC 60603-7. The mating dimensions for the housings under Clause 3 allow the mating conditions under IEC 60603-7 to be fulfilled.
The fully assembled variants (connectors) described in this document incorporate fully compliant IEC 60603-7 series fixed and free connectors.

标准预览图